ndboost
Explorer
- Joined
- Mar 17, 2013
- Messages
- 78
Just got my new board, cpu, and memory in finally and I cant get the damned thing to POST.
Board: SuperMicro X9SCM-F-O
PSU: Zippy R2W-6500P EPS12V Redundant PSU
Memory: 32GB DDR3 1600Mhz ECC Un Buffered Memory
CPU: Intel Pentium 2 G2030
I know a few things could be of issue here...
Board: SuperMicro X9SCM-F-O
PSU: Zippy R2W-6500P EPS12V Redundant PSU
Memory: 32GB DDR3 1600Mhz ECC Un Buffered Memory
CPU: Intel Pentium 2 G2030
I know a few things could be of issue here...
- CPU only supports 1333mhz Memory according to Intel Spec sheets, but i've got a similar cpu running on 1600mhz auto downclocked to 1333 fine in the other room..
- Board says it only supports 1600mhz with rev2 of the BIOS, but im not sure what rev its on from factory...
- PSU may or may not be supported, its EPS12V so it should be though