Specs
OS: TrueNAS Scale 22.02-RC.2Drive Enclosure: Yottamaster 5 Bay
Drives: 1x 500GB SSD, 1x 1TB m2 SSD, {1x Ironwolf 12TB HDD, 4x WP Arsenal 12TB HDD} => for enclosure
Computer: NUC8i3BEH
Problem
I am having issues seeing my 5x 12TB drives in the GUI of TrueNAS Scale - in create pool, disk, etc. Going to the shell and running `lsblk` shows me all my drives (7 in total), but in the GUI I only see three - the SSDs and the last 12TB drive in the enclosure (`/dev/sdg`). If I turn off the drive enclosure and turn it back on I can see the GUI cycling through the HDDs. So I will see `sdc` which is then replaced by `sdd`, etc.What I have tried
Since I can see them all in the shell I can use `zpool` to make a pool with all the HDDs in RAIDZ2, but then running `zpool export ...` and `zpool import ...` don't have any affect in the GUI.I can confirm if I plug the enclosure into my Fedora desktop they all show up as "Generic Drives" in Gnome Disk and I can write to/format them. So they are clearly working, therefore I believe this is just an issue with the GUI of TrueNAS scale...