paradoxiom
Patron
- Joined
- Jun 16, 2015
- Messages
- 239
Log filling up with:
I had errors like that on another drive and I managed to fix them following this guide:
But it's not working on da1
smartctl of da1:
Any other logs or output I can provide?
The drive is a 2GB Seagate FireCuda SSD.
Code:
Aug 30 10:41:30 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 10:41:30 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 11:26:31 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 11:26:31 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 11:26:31 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:11:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:11:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:11:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:56:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:56:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 12:56:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 13:41:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 13:41:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors Aug 30 13:41:29 OrbitallHub smartd[1487]: Device: /dev/da1 [SAT], 4 Currently unreadable (pending) sectors
I had errors like that on another drive and I managed to fix them following this guide:
But it's not working on da1
smartctl of da1:
Code:
root@OrbitallHub:~ # smartctl -a /dev/da1 smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WX21D45C7ZSV LU WWN Device Id: 5 0014ee 2b6d67556 Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Aug 30 14:23:13 2020 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 4604) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 700) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 15 3 Spin_Up_Time 0x0027 224 196 021 Pre-fail Always - 7783 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 84 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 17820 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 84 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5111 194 Temperature_Celsius 0x0022 121 107 000 Old_age Always - 31 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 4 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 81 f4 2c 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 08:28:31.133 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 08:28:31.129 SMART READ DATA ec 00 01 00 00 00 00 00 08:28:31.126 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 08:28:31.125 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 08:28:31.125 IDENTIFY DEVICE Error 3 occurred at disk power-on lifetime: 17781 hours (740 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 81 f4 2c 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 08:26:23.971 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 08:26:23.968 SMART READ DATA ec 00 01 00 00 00 00 00 08:26:23.964 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 08:26:23.964 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 08:26:23.963 IDENTIFY DEVICE Error 2 occurred at disk power-on lifetime: 17772 hours (740 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 81 f4 2c 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 16d+16:53:40.267 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 16d+16:53:40.264 SMART READ DATA ec 00 01 00 00 00 00 00 16d+16:53:40.260 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 16d+16:53:40.260 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 16d+16:53:40.259 IDENTIFY DEVICE Error 1 occurred at disk power-on lifetime: 17768 hours (740 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 81 f4 2c 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d4 00 81 4f c2 00 00 16d+13:00:07.165 SMART EXECUTE OFF-LINE IMMEDIATE b0 d0 01 00 4f c2 00 00 16d+13:00:07.162 SMART READ DATA ec 00 01 00 00 00 00 00 16d+13:00:07.158 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 16d+13:00:07.158 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 16d+13:00:07.157 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 17806 2824348 # 2 Short offline Completed: read failure 40% 17782 10363944 # 3 Short offline Completed: read failure 90% 17781 2774305 # 4 Short captive Completed: read failure 90% 17781 2717296 # 5 Short captive Completed: read failure 90% 17781 2717296 # 6 Conveyance offline Completed: read failure 90% 17781 2717296 # 7 Conveyance offline Completed: read failure 90% 17781 2717298 # 8 Short captive Completed: read failure 90% 17772 454315400 # 9 Conveyance offline Completed: read failure 90% 17772 454315400 #10 Short offline Completed: read failure 90% 17772 454315400 #11 Short captive Completed: read failure 90% 17768 454315400 #12 Extended offline Completed: read failure 90% 17732 454315400 #13 Extended offline Completed: read failure 90% 17618 454315400 #14 Short offline Completed: read failure 90% 17595 454315400 #15 Short offline Completed: read failure 90% 17571 454315400 #16 Short offline Completed: read failure 90% 17547 454315400 #17 Short offline Completed: read failure 90% 17523 454315400 #18 Short offline Completed: read failure 90% 17499 454315400 #19 Short offline Completed: read failure 90% 17475 454315400 #20 Short offline Completed without error 00% 17458 - #21 Short offline Completed without error 00% 17427 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@OrbitallHub:~ #
Any other logs or output I can provide?
The drive is a 2GB Seagate FireCuda SSD.