Hi I got an email this morning from my FreeNAS device saying ada3 has 3 Currently unreadable (pending) sectors. so i ran
the test finished with no errors that i can tell, but i did notice that it had 54 pending sectors. Was wondering if the drive is still ok or if i should RMA
thanks for the help
Code:
smartctl -t long /dev/ada3
the test finished with no errors that i can tell, but i did notice that it had 54 pending sectors. Was wondering if the drive is still ok or if i should RMA
thanks for the help
Code:
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1434 3 Spin_Up_Time 0x0027 177 177 021 Pre-fail Always - 6116 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 26 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 5 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11550 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 15 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 135 194 Temperature_Celsius 0x0022 121 114 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 195 195 000 Old_age Always - 5 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 54 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 11547 - # 2 Extended offline Completed without error 00% 11492 - # 3 Short offline Completed without error 00% 11464 - # 4 Short offline Completed without error 00% 11248 - # 5 Extended offline Completed without error 00% 11132 - # 6 Short offline Completed without error 00% 11032 - # 7 Short offline Completed without error 00% 10936 - # 8 Extended offline Completed without error 00% 10748 - # 9 Short offline Completed without error 00% 10720 - #10 Short offline Completed without error 00% 10505 - #11 Extended offline Completed without error 00% 10389 - #12 Short offline Completed without error 00% 10289 - #13 Short offline Completed without error 00% 10217 - #14 Extended offline Completed without error 00% 10029 - #15 Short offline Completed without error 00% 10001 - #16 Short offline Completed without error 00% 9785 - #17 Extended offline Completed without error 00% 9669 - #18 Short offline Completed without error 00% 9570 - #19 Short offline Completed without error 00% 9474 - #20 Extended offline Completed without error 00% 9297 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.