SerpentMage
Dabbler
- Joined
- May 16, 2017
- Messages
- 29
Hello,
I woke up to an email alert from my NAS stating:
I logged in and no drives show down or degraded. I found this post from a while ago that helped me gather some information. ada2 is showing some cksum errors, however running smartctl on it shows that it's fine, I think?
Would someone be able to look through the info below and help me make sense of it?
Any help would be greatly appreciated, if I need to run more commands please let me know.
Thanks!
John aka SerpentMage
I woke up to an email alert from my NAS stating:
Code:
New alerts: * Pool NASPOOL01 state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
I logged in and no drives show down or degraded. I found this post from a while ago that helped me gather some information. ada2 is showing some cksum errors, however running smartctl on it shows that it's fine, I think?
Would someone be able to look through the info below and help me make sense of it?
Code:
@NASFS01:~ # zpool status -v pool: NASPOOL01 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub repaired 176K in 05:31:35 with 0 errors on Tue Dec 1 05:31:36 2020 config: NAME STATE READ WRITE CKSUM NASPOOL01 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/45c6a5b1-d1d5-11e9-b338-d05099c29a6f ONLINE 0 0 0 gptid/b51632c3-d1a1-11e9-85b8-d05099c29a6f ONLINE 0 0 0 gptid/34f6e5f1-d025-11e9-87cf-d05099c29a6f ONLINE 0 0 0 gptid/dd509a05-d237-11e9-83ca-d05099c29a6f ONLINE 0 0 4 errors: No known data errors pool: eDataStore state: ONLINE scan: scrub repaired 0B in 03:20:58 with 0 errors on Sun Nov 29 03:20:59 2020 config: NAME STATE READ WRITE CKSUM eDataStore ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/9368e7cf-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 gptid/68332ec6-b79c-11e8-a86b-d05099c29a6f.eli ONLINE 0 0 0 gptid/95024bc8-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 gptid/95c787c3-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub repaired 0B in 00:07:29 with 0 errors on Fri Nov 27 03:52:29 2020 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da1p2 ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors
Code:
@NASFS01:~ # glabel status Name Status Components gptid/b51632c3-d1a1-11e9-85b8-d05099c29a6f N/A ada0p2 gptid/45c6a5b1-d1d5-11e9-b338-d05099c29a6f N/A ada1p2 gptid/dd509a05-d237-11e9-83ca-d05099c29a6f N/A ada2p2 gptid/34f6e5f1-d025-11e9-87cf-d05099c29a6f N/A ada3p2 gptid/9368e7cf-fe10-11e6-9c83-d05099c00cbc N/A ada4p2 gptid/68332ec6-b79c-11e8-a86b-d05099c29a6f N/A ada5p2 gptid/95024bc8-fe10-11e6-9c83-d05099c00cbc N/A ada6p2 gptid/95c787c3-fe10-11e6-9c83-d05099c00cbc N/A ada7p2 gptid/465cdcb4-ed6b-11ea-ba9c-d05099c29a6f N/A da0p1 gptid/c72bd0fd-4fd5-11e9-ac21-d05099c29a6f N/A da1p1
Code:
@NASFS01:~ # smartctl -a /dev/ada2 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RC3 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68N32N0 Serial Number: WD-WCC7K5TUYS82 LU WWN Device Id: 5 0014ee 2bbd5f543 Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 1 06:01:50 2020 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (42960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 456) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 167 166 021 Pre-fail Always - 6616 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 13 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10776 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 194 Temperature_Celsius 0x0022 122 114 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10746 - # 2 Extended offline Completed without error 00% 10634 - # 3 Short offline Completed without error 00% 10578 - # 4 Extended offline Completed without error 00% 10466 - # 5 Short offline Completed without error 00% 10410 - # 6 Extended offline Completed without error 00% 10298 - # 7 Short offline Completed without error 00% 10242 - # 8 Extended offline Completed without error 00% 10131 - # 9 Short offline Completed without error 00% 10074 - #10 Extended offline Completed without error 00% 9962 - #11 Short offline Completed without error 00% 9905 - #12 Extended offline Completed without error 00% 9794 - #13 Short offline Completed without error 00% 9738 - #14 Extended offline Completed without error 00% 9626 - #15 Short offline Completed without error 00% 9570 - #16 Extended offline Completed without error 00% 9460 - #17 Short offline Completed without error 00% 9404 - #18 Extended offline Completed without error 00% 9292 - #19 Short offline Completed without error 00% 9236 - #20 Extended offline Completed without error 00% 9124 - #21 Short offline Completed without error 00% 9068 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Any help would be greatly appreciated, if I need to run more commands please let me know.
Thanks!
John aka SerpentMage