SOLVED Update from 11.0-U4 to 11.1 now reports DEGRADED status on pool

Status
Not open for further replies.

Jailer

Not strong, but bad
Joined
Sep 12, 2014
Messages
4,977
Full hardware. All of it.
 

danb35

Hall of Famer
Joined
Aug 16, 2011
Messages
15,504
ffs, it's like pulling teeth. Give your complete hardware specs. Motherboard, disk controller (if used), power supply, etc.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
OK, I misread the previous post:

The full specs are

Super Micro Computers X11 UP, 6th gen. Core i7/i5/i3 Pentium and Celeron processors MBD-X11SSV-Q-O
Crucial - DDR4 - 32 GB : 2 x 16 GB - SO DIMM 260-PIN - 2133 MHz / PC4-17000
Core i3-6100 Skylake CPU - 3.7 GHz - LGA1151 - 2 cores
4 PORT PCIE SATA III CARD
EK Water Blocks EK-RES X3
4 Western Digital Red, SATA 6G, Intellipower
Corsair SF Series SF450 80 Plus Gold SFX Power Supply - 450 Watt
SanDisk 32GB Cruzer FIT+ SECURE ACCESS
 

danb35

Hall of Famer
Joined
Aug 16, 2011
Messages
15,504
SATA cards (other than LSI HBAs) are always suspicious. Are the drives connected to that, or directly to your motherboard? And with only four disks, why have a separate SATA card anyway?
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
SATA cards (other than LSI HBAs) are always suspicious. Are the drives connected to that, or directly to your motherboard? And with only four disks, why have a separate SATA card anyway?

Because the motherboard didn't have enough ports simply. I originally had bought a different motherboard but I got a DOA motherboard twice send from the supplier. So I had to get a different motherboard.

This was what I originally chose

MK ASRock C2750D4 AVOTON Octacore mITX Embedded CPU
 
Last edited:

danb35

Hall of Famer
Joined
Aug 16, 2011
Messages
15,504
Because the motherboard didn't have enough ports simply.
How so? The board you mention has five SATA ports. You have four disks. Four is less than five.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
How so? The board you mention has five SATA ports. You have four disks. Four is less than five.

I simply can't remember on the top of my head at the moment. It has been a year since I build this. But there was a reason why we had to get a SATA card.
 

Jailer

Not strong, but bad
Joined
Sep 12, 2014
Messages
4,977
So what is the SATA card. Specific brand and model please.

This is exactly why I asked for a full hardware list. As @danb35 mentioned that card is suspicious and could be the cause of your host reset/checksum errors.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
So what is the SATA card. Specific brand and model please.

This is exactly why I asked for a full hardware list. As @danb35 mentioned that card is suspicious and could be the cause of your host reset/checksum errors.

Seems strange that this would suddenly cause checksum errors. There nothing connected to the card ATM. I checked. The reason why it is there is because I build the server with the option to add more drives later. As mentioned earlier the motherboard I installed only had 5 SATA ports.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
Well I did the smartctl scan of the drive and it didn't find any errors.

So what to do now?

Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M1VKAEV6
LU WWN Device Id: 5 0014ee 2b81408ef
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sat Dec 16 06:25:28 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED								  
																						  
General SMART Values:																	  
Offline data collection status:  (0x00) Offline data collection activity				  
										was never started.								
										Auto Offline Data Collection: Disabled.			
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(26940) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 272) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   188   175   021	Pre-fail  Always	   -	   3558
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   22
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   087   087   000	Old_age   Always	   -	   9556
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   22
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   13
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   125
194 Temperature_Celsius	 0x0022   115   106   000	Old_age   Always	   -	   32
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error	   00%	  9549		 -
# 2  Extended captive	Interrupted (host reset)	  90%	  9544		 -
# 3  Extended offline	Aborted by host			   90%	  9544		 -
# 4  Extended offline	Aborted by host			   90%	  9544		 -
# 5  Extended offline	Aborted by host			   90%	  9543		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
Can you run smart tests on all your drives and set them up in the gui to run on a schedule? This system needs some maintenance.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
Can you run smart tests on all your drives and set them up in the gui to run on a schedule? This system needs some maintenance.

Set up a test now to run on all drives zpool status -v now reports the drive as DEGRADED

Code:
Warning: settings changed through the CLI are not written to
the configuration database and will be reset on reboot.

root@freenas:~ # zpool status -v
  pool: freenas-boot
 state: ONLINE
  scan: scrub repaired 0 in 0 days 00:24:41 with 0 errors on Tue Dec 12 04:09:41 2017
config:

		NAME		STATE	 READ WRITE CKSUM
		freenas-boot  ONLINE	   0	 0	 0
		  da0p2	 ONLINE	   0	 0	 0

errors: No known data errors

  pool: freenaspool
 state: DEGRADED
status: One or more devices has experienced an unrecoverable error.  An
		attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
		using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://illumos.org/msg/ZFS-8000-9P
  scan: scrub repaired 0 in 0 days 02:50:41 with 0 errors on Sun Dec  3 02:50:41 2017
config:
																						  
		NAME											STATE	 READ WRITE CKSUM		
		freenaspool									 DEGRADED	 0	 0	 0		
		  raidz2-0									  DEGRADED	 0	 0	 0		
			gptid/21b36631-c4a3-11e6-afcd-0cc47ae0446b  ONLINE	   0	 0	 0		
			gptid/227a936a-c4a3-11e6-afcd-0cc47ae0446b  DEGRADED	 0	 0 1.17K  too many errors
			gptid/233a9cf2-c4a3-11e6-afcd-0cc47ae0446b  ONLINE	   0	 0	 0
			gptid/2414cf96-c4a3-11e6-afcd-0cc47ae0446b  ONLINE	   0	 0	 0

errors: No known data errors
 
Last edited by a moderator:

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
gptid/227a936a-c4a3-11e6-afcd-0cc47ae0446b
This disk is dead or is having some kind of issue. You should replace it or wiggle the cable or something. I think you ran the first smart test again the wrong disk.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
This disk is dead or is having some kind of issue. You should replace it or wiggle the cable or something. I think you ran the first smart test again the wrong disk.

No I ran on the right disk. But the test completed before it went from 1 checksome error to DEGRADED state.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
I have now run the smartctl -t long on 4 discs and it doesn't to find any errors on any of the discs? Here is the output of ada0

Code:
root@freenas:~ # smartctl -a /dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M0FU4X7K
LU WWN Device Id: 5 0014ee 26315af4b
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sat Dec 16 15:21:21 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(26400) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 266) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   176   172   021	Pre-fail  Always	   -	   4183
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   22
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   087   087   000	Old_age   Always	   -	   9565
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   22
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   13
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   143
194 Temperature_Celsius	 0x0022   107   099   000	Old_age   Always	   -	   40
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error	   00%	  9562		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


and ada1

Code:
root@freenas:~ # smartctl -a /dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M7JT4AT7
LU WWN Device Id: 5 0014ee 2b86c0d1e
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sat Dec 16 15:22:09 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(26100) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 264) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   175   171   021	Pre-fail  Always	   -	   4233
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   22
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   087   087   000	Old_age   Always	   -	   9565
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   22
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   13
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   149
194 Temperature_Celsius	 0x0022   110   102   000	Old_age   Always	   -	   37
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error	   00%	  9562		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


and ada2 (the drive reporting the errors)

Code:
root@freenas:~ # smartctl -a /dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M7JT4AT7
LU WWN Device Id: 5 0014ee 2b86c0d1e
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sat Dec 16 15:22:09 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(26100) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 264) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   175   171   021	Pre-fail  Always	   -	   4233
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   22
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   087   087   000	Old_age   Always	   -	   9565
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   22
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   13
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   149
194 Temperature_Celsius	 0x0022   110   102   000	Old_age   Always	   -	   37
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error	   00%	  9562		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


and finally ada3

Code:
root@freenas:~ # smartctl -a /dev/ada3
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M5DRKCZ2
LU WWN Device Id: 5 0014ee 2b86c01de
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sat Dec 16 15:24:02 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(26100) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 264) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   175   171   021	Pre-fail  Always	   -	   4250
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   22
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   087   087   000	Old_age   Always	   -	   9565
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   22
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   13
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   146
194 Temperature_Celsius	 0x0022   110   101   000	Old_age   Always	   -	   37
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error	   00%	  9562		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

danb35

Hall of Famer
Joined
Aug 16, 2011
Messages
15,504
It's now been suggested a few times that you check cables and connections--I even recommended you check that before you mess with disk troubleshooting. Have you?
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
It's now been suggested a few times that you check cables and connections--I even recommended you check that before you mess with disk troubleshooting. Have you?

Doing this right now. I have just turned the machine of and I am about to check everything on it.
 

André Fettouhi

Contributor
Joined
Nov 12, 2016
Messages
108
Doing this right now. I have just turned the machine of and I am about to check everything on it.

Well, I checked everything and every connection and started the machine up again and it still complains about single checksum error on ada2. Waiting to see when it sets the drive to degraded. So what to do? Do I buy a new drive and replace the drive or can I fix this any way? If I buy a new drive do I put it in the machine and taske old offline and click replace in Freenas web client? But the way it is a raidz2 build without hotswap so I have to turn off the machine in order to replace the drive.
 

nojohnny101

Wizard
Joined
Dec 3, 2015
Messages
1,477
Well, I checked everything and every connection and started the machine up again and it still complains about single checksum error on ada2. Waiting to see when it sets the drive to degraded. So what to do? Do I buy a new drive and replace the drive or can I fix this any way? If I buy a new drive do I put it in the machine and taske old offline and click replace in Freenas web client? But the way it is a raidz2 build without hotswap so I have to turn off the machine in order to replace the drive.
The manual is your friend:
http://doc.freenas.org/11/storage.html#replacing-a-failed-drive
 
Status
Not open for further replies.
Top