I have been learning FreeNAS since late January 2020. I purchased a used server:
"SuperMicro 4U CSE-846 24 Bay SAS2 BP X9DRi-F/2x W/ 2x E5-2620 32GB IT MODE"
To replace a dead Drobo5N. I used Unix 30 years ago, and wrote Linux device drivers 15 years ago. I'm not sure if the prior experience helped or hindered learning FreeBSD/FreeNAS or not. Either way becoming a DIY system administrator has been interesting.
I installed qBittorrent in a jail about four months ago. I recall the install process being straightforward. The overall system was never really stable until I swapped out the recommended USB thumb drive for an old laptop hard drive. It was smooth sailing after that.
Recently I went to update, qBittorrent 4.2.5. There were some errors that I don't recall, so I decided to simply kill off the jail and reinstall from scratch. There were some complaints from the OS during install (again, I don't remember what) so I set it aside for a few days. I had gone into the advanced settings and enabled tunneling in the expectation of also installing PrivateInternetService. I had not enabled tunneling before install the first install, so I tried again without it and qBittorrent installed. Now that status is qBittorrent 4.2.5 is running but I cannot log into the WebUI with the default login and password.
In using google on the web and search on this site, the only information I have found is to delete the password from the conf file. There isn't one that I can find.
I'm running Version: FreeNAS-11.3-U3.2
I went to the command line inside the jail:
----------------------------------------------------------------------
root@qbittorrent:~ # pwd
/root
root@qbittorrent:~ # cd ..
root@qbittorrent:/ # cd .config
root@qbittorrent:/.config # ls
qBittorrent
root@qbittorrent:/.config # cd q*
root@qbittorrent:/.config/qBittorrent # ls
qBittorrent-data.conf qBittorrent.conf rss
root@qbittorrent:/.config/qBittorrent # cat *.conf
[Stats]
AllStats
oot@qbittorrent:/ # cd .config
root@qbittorrent:/.config # ls
qBittorrent
root@qbittorrent:/.config # cd q*
root@qbittorrent:/.config/qBittorrent # ls
qBittorrent-data.conf qBittorrent.conf rss
root@qbittorrent:/.config/qBittorrent # cat *.conf
The contents of qBittorrent-conf:
[Stats]
AllStats=@Variant(\0\0\0\x1c\0\0\0\x2\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0U\0L\0\0\0\x5\0\0\0\0\0\v\x12\xc8\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0\x44\0L\0\0\0\x5\0\0\0\0\0\t\xc6\x80)
The contents of qBittorrent.conf:
[Preferences]
Connection\PortRangeMin=29743
Queueing\QueueingEnabled=false
-----------------------------------------------------------------------
So what do and those who come after do about this?
Thanks,
-Evan
"SuperMicro 4U CSE-846 24 Bay SAS2 BP X9DRi-F/2x W/ 2x E5-2620 32GB IT MODE"
To replace a dead Drobo5N. I used Unix 30 years ago, and wrote Linux device drivers 15 years ago. I'm not sure if the prior experience helped or hindered learning FreeBSD/FreeNAS or not. Either way becoming a DIY system administrator has been interesting.
I installed qBittorrent in a jail about four months ago. I recall the install process being straightforward. The overall system was never really stable until I swapped out the recommended USB thumb drive for an old laptop hard drive. It was smooth sailing after that.
Recently I went to update, qBittorrent 4.2.5. There were some errors that I don't recall, so I decided to simply kill off the jail and reinstall from scratch. There were some complaints from the OS during install (again, I don't remember what) so I set it aside for a few days. I had gone into the advanced settings and enabled tunneling in the expectation of also installing PrivateInternetService. I had not enabled tunneling before install the first install, so I tried again without it and qBittorrent installed. Now that status is qBittorrent 4.2.5 is running but I cannot log into the WebUI with the default login and password.
In using google on the web and search on this site, the only information I have found is to delete the password from the conf file. There isn't one that I can find.
I'm running Version: FreeNAS-11.3-U3.2
I went to the command line inside the jail:
----------------------------------------------------------------------
root@qbittorrent:~ # pwd
/root
root@qbittorrent:~ # cd ..
root@qbittorrent:/ # cd .config
root@qbittorrent:/.config # ls
qBittorrent
root@qbittorrent:/.config # cd q*
root@qbittorrent:/.config/qBittorrent # ls
qBittorrent-data.conf qBittorrent.conf rss
root@qbittorrent:/.config/qBittorrent # cat *.conf
[Stats]
AllStats
oot@qbittorrent:/ # cd .config
root@qbittorrent:/.config # ls
qBittorrent
root@qbittorrent:/.config # cd q*
root@qbittorrent:/.config/qBittorrent # ls
qBittorrent-data.conf qBittorrent.conf rss
root@qbittorrent:/.config/qBittorrent # cat *.conf
The contents of qBittorrent-conf:
[Stats]
AllStats=@Variant(\0\0\0\x1c\0\0\0\x2\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0U\0L\0\0\0\x5\0\0\0\0\0\v\x12\xc8\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0\x44\0L\0\0\0\x5\0\0\0\0\0\t\xc6\x80)
The contents of qBittorrent.conf:
[Preferences]
Connection\PortRangeMin=29743
Queueing\QueueingEnabled=false
-----------------------------------------------------------------------
So what do and those who come after do about this?
Thanks,
-Evan