TrueNAS-SCALE-23.10.1 - SSD Temps Missing in UI

[MikeO3]

Added some SSD's to my system and there are no temps being reported in the UI.
These disks were not in the system per-update to 23.10.1 so do not know if the upgrade is the issue.
4 previous rust HDD's were reporting temps and the current 3 plus 2 nvme are reporting temps.
There were a few threads about this problem reported when the time zone on system and TrueNAS were different. Both are set the same in BIOS and TrueNAS.
All disks are set to Always On and Adv Power Management disabled.

Created a support ticket but thought I would put out in the community as well.

SSD SMART Status Report Summary​

Device​

Model​

Serial Number​

Capacity​

SMART Status​

Temp​

Power-On Time (ymdh)​

Power Cycle Count​

Realloc Sectors​

Program Fail Count​

Erase Fail Count​

Offline Uncorrectable Sectors​

CRC Errors​

Wear Leveling Count​

Total Bytes Written​

Bytes Written (per Day)​

Last Test Age (days)​

Last Test Type​

/dev/sdc​

Samsung SSD 870 QVO 4TB​

S5VYNJ0W906226P​

[4.00 TB]​

PASSED​

25°C​

0y 0m 1d 9h​

4​

0​

0​

0​

0​

0​

100%​

0TB​

0GB​

0​

Short offline​

/dev/sde​

Samsung SSD 870 QVO 4TB​

S5VYNJ0W904833J​

[4.00 TB]​

PASSED​

26°C​

0y 0m 1d 9h​

4​

0​

0​

0​

0​

0​

100%​

0TB​

0GB​

0​

Short offline​

/dev/sdf​

Samsung SSD 870 QVO 4TB​

S5VYNJ0W904827H​

[4.00 TB]​

PASSED​

24°C​

0y 0m 1d 9h​

4​

0​

0​

0​

0​

0​

100%​

0TB​

0GB​

0​

Short offline​

/dev/sdg​

Samsung SSD 870 QVO 4TB​

S5VYNJ0W908174V​

[4.00 TB]​

PASSED​

23°C​

0y 0m 1d 9h​

5​

0​

0​

0​

0​

0​

100%​

0TB​

0GB​

0​

Short offline​

/dev/sdi​

Samsung SSD 870 QVO 4TB​

S5VYNG0R301144J​

[4.00 TB]​

PASSED​

27°C​

2y 0m 26d 6h​

117​

0​

0​

0​

0​

0​

99%​

31.0TB​

40.9GB​

0​

Short offline​