Hi Guys;
So I installed Freenas on a Thinkserver with LSI 9240-8i SAS controller. All disks are configured as Raid0, but on boot I see Freenas will detect Transfers of 150 MB only.
Foloowing some suggestions, I removed the volumes and kept the drives as unconfigured under LSI, but I git the same results.
I decided to use a Dell PowerEdge R710 server with a H700 controller, for my surprise the same result, transfers of 150 MB only.
What am I missing?
So I installed Freenas on a Thinkserver with LSI 9240-8i SAS controller. All disks are configured as Raid0, but on boot I see Freenas will detect Transfers of 150 MB only.
Foloowing some suggestions, I removed the volumes and kept the drives as unconfigured under LSI, but I git the same results.
I decided to use a Dell PowerEdge R710 server with a H700 controller, for my surprise the same result, transfers of 150 MB only.
What am I missing?