"The web interface could not be accessed. Please check network configuration."

[Theoneuser]

Hello, yesterday i installed freenas without any problems, i was able to access the interface.
Today i decided to reinstall it on an other drive... the setup was all the same but the IP it gave me wasn't. First one that worked was something like this : 192.168.1.130. -> Worked yesterday
The second one was: 192.168.192.20 -> Not working

I tried alot of options on the forum and other places but none fixed my issue... what could this be?

 

[G8One2]

Its on the wrong subnet. You need to ssh into the freenas box or use IPMI if you have it, and manually configure the interface.

 

[Theoneuser]

Its on the wrong subnet. You might need to ssh into the freenas box or use IPMI if you have it, and manually configure the interface.

It's installed on a pc...can you explain further? I am new to NAS... thanks.

How to manual configure the interface?

 

[melloa]

It's installed on a pc...can you explain further? I am new to NAS... thanks.

How to manual configure the interface?

Either you did manually configured your IP on your FreeNAS or you fat fingered the numbers on your OP.

Your first IP was on 192.168.1 subnet and the second on 192.168.192.

Make sure your router is with the DHCP on (probably is), install monitor/keyboard on your NAS, and use the console to either set your interfaces to DHCP or manually to the correct subnet (plenty info here on how to do it).