supermicro x11 ram problem

[ghost reaper]

hi everyone

i know it not about of FreeNAS, i try Supermicro tech but no help

i got Supermicro X11SSL-F did have 8gb ram, now increasing it with 2x 8GB 1Rx4 PC4-2133P-RC1-11 KTH-PL421/8G 1.2v & DRAM Component Part H5AN4G4NAFR

when i insert ram as per manual says, but ram not detected,

should i do bios update? running 1.0b to 2.0c?
or just faulty ram?

cheers

 

[BigDave]

8GB Value RAM listed for your X11SSL-F Mobo is:
Part Number: KVR21E15D8/8
Found here at Kingston's Memory Search page.

 

[BigDave]

The KTH-PL421/8G modules are listed as System Specific Memory for HP/Compaq systems.

 

[ChriZ]

I've personally had good luck with system specific DIMMS for HP or Dell on Supermicro boards in the past.
I would say that they work just fine in other systems, too.
In this case, though, they can't work because those DIMMS are Registered and the Supermicro in question supports unbuffered.

 

[jlentz3]

8GB Value RAM listed for your X11SSL-F Mobo is:
Part Number: KVR21E15D8/8
Found here at Kingston's Memory Search page.

I’ve used this ram in about 4 X11ssl systems I’ve built in the last year. Good stuff. Cheap too.


Sent from my iPhone using Tapatalk