HELP with RAM for SuperMicro X11SSL-CF-0

Status
Not open for further replies.

bonzemail

Cadet
Joined
Mar 23, 2018
Messages
3
Hello,

I have now tried 4 sets of RAM and it has become apparent that I don't know what I'm doing wrong. I cannot get them to work and get an error on boot "Incompatible Hardware". These are the ones I have tried...

1 - Samsung M393A2G40DB0-CPB 32 GB (2x16) PC4-2133P 2133MHz REG ECC DDR4 RDIMM
2 - HP 8GB PC3-10600 DDR3-1333 2Rx4 ECC Registered 1.35V DIMM (HP PN# 647650-071)
3 - Crucial 16GB Single DDR4 2400 MT/s (PC4-19200) DR x8 DIMM 288-Pin Memory - CT16G4DFD824A
4 - Someone at work let me try their ECC UDIMM, but I gave them back when they didn't work so I don't recall the brand.

Any chance someone can just tell me what to buy...I'm desperate at this point.

I think it says in my signature, but I have the:
  • Supermicro Motherboard X11SSL-CF-O LGA 1151 DDR4
  • Intel Xeon Processor E3-1230v5 (8M Cache, 3.40 GHz) FC-LGA14C
Thank you in advance!
 
Joined
May 10, 2017
Messages
838
1 - Samsung M393A2G40DB0-CPB 32 GB (2x16) PC4-2133P 2133MHz REG ECC DDR4 RDIMM
2 - HP 8GB PC3-10600 DDR3-1333 2Rx4 ECC Registered 1.35V DIMM (HP PN# 647650-071)
These are registered ECC and won't work.

3 - Crucial 16GB Single DDR4 2400 MT/s (PC4-19200) DR x8 DIMM 288-Pin Memory - CT16G4DFD824A
This one is non ECC, so it won't work either.

Someone at work let me try their ECC UDIMM, but I gave them back when they didn't work so I don't recall the brand.
This one can't say :)
 

Alex98234

Dabbler
Joined
Aug 18, 2015
Messages
23
Status
Not open for further replies.
Top