I'm using a Supermicro X10SLL-F board with an i3 4330 and 8GB of Samsung ECC RAM (M391B1G73QH0-YK0).
After starting the system the CPU fan starts spinning and the systems seems to start but there is no video output via VGA.
If I connect the IPMI ethernet, I can access the IPMI webinterface (attached image). That even works if the RAM is not installed.
The VGA jumper is set to 1-2 so that shouldn't be the problem.
Any ideas or recommendations to fix this issue?
After starting the system the CPU fan starts spinning and the systems seems to start but there is no video output via VGA.
If I connect the IPMI ethernet, I can access the IPMI webinterface (attached image). That even works if the RAM is not installed.
The VGA jumper is set to 1-2 so that shouldn't be the problem.
Any ideas or recommendations to fix this issue?