dvc9
Explorer
- Joined
- May 2, 2012
- Messages
- 72
Hey,
I have a AVAGO 3108 MegaRAID controller, in JBOD mode.
I have attached 3 new drives, but they dont show up, as new drives, in FreeNAS.
I belive its because of the way the adapter works, that is has to MARK each drive as JBOD.
When using StorCLI, // - storcli /cx show all
Then I get all settings n such, and I get the drive list.
This is the exiting part :
So the drives are marked as UGood, and not JBOD.
So to Enable JBOD, I did try following :
I belive therefor the storcli needs some permissions...
Have anyone else tested, and worked with this ?
I have a AVAGO 3108 MegaRAID controller, in JBOD mode.
I have attached 3 new drives, but they dont show up, as new drives, in FreeNAS.
I belive its because of the way the adapter works, that is has to MARK each drive as JBOD.
When using StorCLI, // - storcli /cx show all
Then I get all settings n such, and I get the drive list.
This is the exiting part :
Code:
PD LIST : ======= --------------------------------------------------------------------------------------- EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type --------------------------------------------------------------------------------------- 9:0 14 UGood F 893.75 GB SATA SSD N N 512B SAMSUNG MZ7WD960HMHP-00003 U - 9:1 25 UGood F 893.75 GB SATA SSD N N 512B SAMSUNG MZ7WD960HMHP-00003 U - 9:2 17 UGood F 893.75 GB SATA SSD N N 512B SAMSUNG MZ7WD960HMHP-00003 U -
So the drives are marked as UGood, and not JBOD.
So to Enable JBOD, I did try following :
Code:
root@storage01[~]# storcli /c0/e9/s0 set jbod CLI Version = 007.0504.0000.0000 Nov 22, 2017 Operating system = FreeBSD 11.2-STABLE Controller = 0 Status = Failure Description = Set Drive JBOD Failed. Detailed Status : =============== ----------------------------------------------- Drive Status ErrCd ErrMsg ----------------------------------------------- /c0/e9/s0 Failure 255 Operation not allowed. ----------------------------------------------- root@storage01[~]# sudo storcli /c0/e9/s0 set jbod Sorry, user root is not allowed to execute '/usr/local/sbin/storcli /c0/e9/s0 set jbod' as root on storage01.qvisten.no.
I belive therefor the storcli needs some permissions...
Have anyone else tested, and worked with this ?