Sir.Robin
Guru
- Joined
- Apr 14, 2012
- Messages
- 554
New BIOS and IPMI available :)
http://www.supermicro.com.tw/products/motherboard/Xeon/C220/X10SL7-F.cfm
Anyone done it?
Changelogs! :D
EDIT1: Sensor problem!
Can't read IPMI with ipmiutil anymore. Also the sesor readings were ghone in the IPMI web GUI.
Reset to factory defaults solved the GUI issue, but i still can't get IPMIUTIL to function at all.
EDIT2:
Ipmiutil is ok again. Had to use the default 623 RMCP port. :)
So only the sensor readings in GUI were a bug from the firmware update.
Saw a line somewhere in the increadible messy changelog (under some other version) that a factory reset should be done after flashing.
http://www.supermicro.com.tw/products/motherboard/Xeon/C220/X10SL7-F.cfm
Anyone done it?
Changelogs! :D
EDIT1: Sensor problem!
Can't read IPMI with ipmiutil anymore. Also the sesor readings were ghone in the IPMI web GUI.
Reset to factory defaults solved the GUI issue, but i still can't get IPMIUTIL to function at all.
EDIT2:
Ipmiutil is ok again. Had to use the default 623 RMCP port. :)
So only the sensor readings in GUI were a bug from the firmware update.
Saw a line somewhere in the increadible messy changelog (under some other version) that a factory reset should be done after flashing.
Attachments
Last edited: