Nucshuco
Explorer
- Joined
- Aug 22, 2014
- Messages
- 52
Bios release notes for X10SRL-F
If anybody is looking for them.
BIOS Update: X10SRL6.801 Date: 8-01-2016 Version: 2.0a
X10SRL-F:
1. Update Broadwell-EP RC 3.6.0 PLR4 release.
2. Update Haswell-EP C0,1/M0,1/R2 CPU uCode M6F306F2_00000038.
3. Update CPU microcode for Broadwell-EP B0/M0/R0 MEF406F1_0B00001B.
4. Update Intel Server Platform Services 3.1.3 36.0 PLR3 for Grantley Refresh Platforms
5. Fixed an issue that OS installed under IDE mode failed to boot after BIOS Lock is enabled for security.
6. Fixed "VGA Priority" setting malfunctioned when CSM Support item was disabled in BIOS Setup.
7. Fixed SUM InBand flash BIOS in Linux fail when FDT is different.
8. Update SATA RAID OPROM/EFI driver to v4.5.0.1012 (RSTe package 4.5.0.1333).
9. Update TCG2 Label 08
10. Fixed a defect DIMM with very small margin was reported at incorrect location on POST screen and IPMI SEL.
11. Update Intel Network Software 20.5 PV 10G uEFI driver for new LAN chip supported
12. Fixed healthy DIMMs behind a memory channel where a defect DIMM existed got incorrectly disabled.
13. Synchronized BIOS Build Date with DMI Type 0.
14. Fixed that High Precision Event Timer always shows up in Windows Device Manager when it was set to "Disabled" in setup menu.
15. Enable BIOS and SPI Lock function for security.
16. Clear bit 25 in MSR 0x1FC when HWPM native mode enabled.
17. Add Intel X550 (0x15638086)in SmcDevReport module for reporting it to BMC.
18. Fixed TPM 2.0 issues found during Windows Server 2016 WHQL certification.
19. Modify loop number to match the actual Bank Table list.
20. Fixed Security Device Support item when disabled the Security Device Support, the Security Device Support item will be hidden after reboot.
21. Fix memory freq cannot be set manually when BDW has two 2133 DIMM per channel
22. Set SMBIOS type 39's location field as PSU1, PSU2.
23. Update PXE OPROM to 1.5.72 for i350.
24. Update AOM's CTLE value for Broadwell CPU.
25. To fix boot order sub menu will become abnormal if load setup default before change boot order issue.
26. Update BIOS ACM 3.1.0 PW, SINIT ACM 3.1.0 PW.
27. Enhanced Network boot instance followed BBS priorities.
28. Fixed boot order priority not working properly if change group and sub menu at the time problem.
29. Fixed disable UEFI boot group function fail problem.
30. Fixed USB floppy/key boot instance function not work if multiple mixed USB types devices plugged.
31. Fixed UCE DIMM location could be incorrect at sometimes by MEI.
32. Disabled GPIO_C/D PMSync & C0 Transmit.
33. Fixed When SEL is Full set to "Erase Immediately" but not working.
34. Added IB device report to IPMI.
35. Fixed boot order priority in sub menu group could not working properly if set "Save Changes" and then set "Save Changes and Reset" in setup.
36. Add factory default key for Secure Boot.
37. Default enable ME MCTP function.
38. Revise memory speed if POR is disabled, esp. for 3PDC
39. Reset BIOS config by IPMI CMOS clear flag.
40. Removing warning message when enabled secure boot and patch secure boot support item can be enabled immediately.
41. Grayout CSM item when secure boot control item set to enable.
42. Patch CTRL+HOME can't work via console
43. [SUM] Fixed "Test_case_320 - Inband - BIOS Config should not change after do change bioscfg and update bios failed.
44. Fixed TCG2 event log data is incorrect when loading TE image.
45. Fixed issue ACPI status does not be changed by IPMI when boot to Redhat Server 6.6.
46. Fix no Manufacturer string in SMBIOS type 17 when plugging Kingston DIMM.
47. Fixed WatchDog triggering NMI stress test failed.
48. Change memory frequency from MT/s to MHz for consistency
49. Fixed system will loop in CPU SMM mode after running BMC FW upgrade loop test over 24 hours.
50. Set default system date and time to 2015/01/01 00:00:00 after clearing CMOS.
51. Fix system hang at setup entrance if too many event logs
52. Modify log memory UCE and map out mechanism.
53. Updated legacy VBIOS and GOP to v.1.02.07.
54. Fixed chassis intrusion status in Sensor Readings of IPMI web will be reset after AC on
If anybody is looking for them.
BIOS Update: X10SRL6.801 Date: 8-01-2016 Version: 2.0a
X10SRL-F:
1. Update Broadwell-EP RC 3.6.0 PLR4 release.
2. Update Haswell-EP C0,1/M0,1/R2 CPU uCode M6F306F2_00000038.
3. Update CPU microcode for Broadwell-EP B0/M0/R0 MEF406F1_0B00001B.
4. Update Intel Server Platform Services 3.1.3 36.0 PLR3 for Grantley Refresh Platforms
5. Fixed an issue that OS installed under IDE mode failed to boot after BIOS Lock is enabled for security.
6. Fixed "VGA Priority" setting malfunctioned when CSM Support item was disabled in BIOS Setup.
7. Fixed SUM InBand flash BIOS in Linux fail when FDT is different.
8. Update SATA RAID OPROM/EFI driver to v4.5.0.1012 (RSTe package 4.5.0.1333).
9. Update TCG2 Label 08
10. Fixed a defect DIMM with very small margin was reported at incorrect location on POST screen and IPMI SEL.
11. Update Intel Network Software 20.5 PV 10G uEFI driver for new LAN chip supported
12. Fixed healthy DIMMs behind a memory channel where a defect DIMM existed got incorrectly disabled.
13. Synchronized BIOS Build Date with DMI Type 0.
14. Fixed that High Precision Event Timer always shows up in Windows Device Manager when it was set to "Disabled" in setup menu.
15. Enable BIOS and SPI Lock function for security.
16. Clear bit 25 in MSR 0x1FC when HWPM native mode enabled.
17. Add Intel X550 (0x15638086)in SmcDevReport module for reporting it to BMC.
18. Fixed TPM 2.0 issues found during Windows Server 2016 WHQL certification.
19. Modify loop number to match the actual Bank Table list.
20. Fixed Security Device Support item when disabled the Security Device Support, the Security Device Support item will be hidden after reboot.
21. Fix memory freq cannot be set manually when BDW has two 2133 DIMM per channel
22. Set SMBIOS type 39's location field as PSU1, PSU2.
23. Update PXE OPROM to 1.5.72 for i350.
24. Update AOM's CTLE value for Broadwell CPU.
25. To fix boot order sub menu will become abnormal if load setup default before change boot order issue.
26. Update BIOS ACM 3.1.0 PW, SINIT ACM 3.1.0 PW.
27. Enhanced Network boot instance followed BBS priorities.
28. Fixed boot order priority not working properly if change group and sub menu at the time problem.
29. Fixed disable UEFI boot group function fail problem.
30. Fixed USB floppy/key boot instance function not work if multiple mixed USB types devices plugged.
31. Fixed UCE DIMM location could be incorrect at sometimes by MEI.
32. Disabled GPIO_C/D PMSync & C0 Transmit.
33. Fixed When SEL is Full set to "Erase Immediately" but not working.
34. Added IB device report to IPMI.
35. Fixed boot order priority in sub menu group could not working properly if set "Save Changes" and then set "Save Changes and Reset" in setup.
36. Add factory default key for Secure Boot.
37. Default enable ME MCTP function.
38. Revise memory speed if POR is disabled, esp. for 3PDC
39. Reset BIOS config by IPMI CMOS clear flag.
40. Removing warning message when enabled secure boot and patch secure boot support item can be enabled immediately.
41. Grayout CSM item when secure boot control item set to enable.
42. Patch CTRL+HOME can't work via console
43. [SUM] Fixed "Test_case_320 - Inband - BIOS Config should not change after do change bioscfg and update bios failed.
44. Fixed TCG2 event log data is incorrect when loading TE image.
45. Fixed issue ACPI status does not be changed by IPMI when boot to Redhat Server 6.6.
46. Fix no Manufacturer string in SMBIOS type 17 when plugging Kingston DIMM.
47. Fixed WatchDog triggering NMI stress test failed.
48. Change memory frequency from MT/s to MHz for consistency
49. Fixed system will loop in CPU SMM mode after running BMC FW upgrade loop test over 24 hours.
50. Set default system date and time to 2015/01/01 00:00:00 after clearing CMOS.
51. Fix system hang at setup entrance if too many event logs
52. Modify log memory UCE and map out mechanism.
53. Updated legacy VBIOS and GOP to v.1.02.07.
54. Fixed chassis intrusion status in Sensor Readings of IPMI web will be reset after AC on
