Robert Smith
Patron
- Joined
- May 4, 2014
- Messages
- 270
Does anybody have experience with Seagate 8TB NAS drives?
I just got one (part number ST8000VN0002). It runs a little hot, but I gather they run hot for everybody.
More alarmingly, I am having trouble consistently completing self-tests. Sporadically, a test would get stuck and not move anywhere until the drive is powered down.
Short and conveyance tests get stuck on 90%, and long tests get stuck on 10%.
If I abort the test without powering the drive down, the consequent tests will always get stuck.
If I power the drive down, and then turn it back up, the next test may run fine, or may get stuck again.
This is not due to the drive being accessed as I have not partitioned or created any volumes yet.
The SMART parameters are all good, and the drive reports that it is healthy.
No firmware updates are currently available.
I just got one (part number ST8000VN0002). It runs a little hot, but I gather they run hot for everybody.
More alarmingly, I am having trouble consistently completing self-tests. Sporadically, a test would get stuck and not move anywhere until the drive is powered down.
Short and conveyance tests get stuck on 90%, and long tests get stuck on 10%.
If I abort the test without powering the drive down, the consequent tests will always get stuck.
If I power the drive down, and then turn it back up, the next test may run fine, or may get stuck again.
This is not due to the drive being accessed as I have not partitioned or created any volumes yet.
The SMART parameters are all good, and the drive reports that it is healthy.
No firmware updates are currently available.
Code:
smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST8000VN0002-1Z8112 Serial Number: [redacted] LU WWN Device Id: 5 000c50 091566a8e Firmware Version: SC60 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 14 13:55:06 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 743) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 084 071 044 Pre-fail Always - 243449864 3 Spin_Up_Time 0x0003 085 085 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 063 061 045 Pre-fail Always - 2036135 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23 (51 84 0) 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 3 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 099 099 000 Old_age Always - 8590065666 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 063 056 040 Old_age Always - 37 (Min/Max 27/42) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 168 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 12 194 Temperature_Celsius 0x0022 037 044 000 Old_age Always - 37 (0 25 0 0 0) 195 Hardware_ECC_Recovered 0x001a 006 006 000 Old_age Always - 243449864 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6 (196 101 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3612828032 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 245454450 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 23 - # 2 Short offline Completed without error 00% 22 - # 3 Extended offline Aborted by host 90% 20 - # 4 Extended offline Aborted by host 90% 3 - # 5 Conveyance offline Completed without error 00% 3 - # 6 Short offline Completed without error 00% 3 - # 7 Short offline Aborted by host 10% 3 - # 8 Conveyance offline Aborted by host 10% 3 - # 9 Conveyance offline Interrupted (host reset) 10% 2 - #10 Short offline Aborted by host 10% 2 - #11 Short offline Completed without error 00% 0 - #12 Extended offline Aborted by host 90% 0 - #13 Short offline Completed without error 00% 0 - #14 Conveyance offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Last edited:
