Hi guys,
I my server, I installed a RAID card because I didn't have enough SATA ports.
4 HDD are connected on the RAID card and treated as JBOD.
When I run the SMARTCTL command it doesn't recognize them:
From what I see, I fear SMART is not supported.
Any idea how I can make it so SMART recognizes the drives and supports them?
I my server, I installed a RAID card because I didn't have enough SATA ports.
4 HDD are connected on the RAID card and treated as JBOD.
When I run the SMARTCTL command it doesn't recognize them:
Code:
~# smartctl -a /dev/mfisyspd0 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org /dev/mfisyspd0: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary ~# smartctl -a -d ata /dev/mfisyspd0 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: Inappropriate ioctl for device A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. ~# smartctl -a -d ata -T permissive /dev/mfisyspd0 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: Inappropriate ioctl for device === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: [No Information Found] Local Time is: Fri Jun 13 17:56:03 2014 EDT SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
From what I see, I fear SMART is not supported.
Any idea how I can make it so SMART recognizes the drives and supports them?