state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: resilvered 5.64M in 0h0m with 0 errors on Fri Apr 4 21:10:21 2014
config:
NAME STATE READ WRITE CKSUM
RaidZ1 ONLINE 0 0
0
raidz1-0 ONLINE 0 0
0
gptid/299dce8e-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
0 block size: 512B configured, 4096B native
gptid/2a43be61-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
0 block size: 512B configured, 4096B native
gptid/2ae81dc9-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
39 block size: 512B configured, 4096B native
errors: No known data errors
(All 3 drives are seagate 2TB drives, model #ST2000DL003)
As of last night i actually had a degrade error, and this drive which is now online but has 39 cksum errors wasn't even running or being detected.
I recently (today 4/4/14) ran sealtools on the drive that stopped showing up in freenas, upon booting it beeped 3 or 4 times, turned off, then rebooted and ran fine for the 8hours it took to run both general scans (short and long) both of which came back with no errors what so ever.
Upon placing back into my nas i get the following error code which i first posted. I've already purchased a new drive but now that it seems to be up and running with no issues I'm just wondering if its worth replacing?
Anyone able to shed some light on this for me? first time ever having a failed drive in my nas.
Edit: Started to perform a scrub, looks like as if its upto 377 chksum errors now. Assuming its time to replace. However scrub says 6hours remaining atm.
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: resilvered 5.64M in 0h0m with 0 errors on Fri Apr 4 21:10:21 2014
config:
NAME STATE READ WRITE CKSUM
RaidZ1 ONLINE 0 0
0
raidz1-0 ONLINE 0 0
0
gptid/299dce8e-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
0 block size: 512B configured, 4096B native
gptid/2a43be61-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
0 block size: 512B configured, 4096B native
gptid/2ae81dc9-02e3-11e2-9dbf-50e549deb030 ONLINE 0 0
39 block size: 512B configured, 4096B native
errors: No known data errors
(All 3 drives are seagate 2TB drives, model #ST2000DL003)
As of last night i actually had a degrade error, and this drive which is now online but has 39 cksum errors wasn't even running or being detected.
I recently (today 4/4/14) ran sealtools on the drive that stopped showing up in freenas, upon booting it beeped 3 or 4 times, turned off, then rebooted and ran fine for the 8hours it took to run both general scans (short and long) both of which came back with no errors what so ever.
Upon placing back into my nas i get the following error code which i first posted. I've already purchased a new drive but now that it seems to be up and running with no issues I'm just wondering if its worth replacing?
Anyone able to shed some light on this for me? first time ever having a failed drive in my nas.
Edit: Started to perform a scrub, looks like as if its upto 377 chksum errors now. Assuming its time to replace. However scrub says 6hours remaining atm.