Hi, I've been running FreeNAS (now TrueNAS) for many many years now (although, I am still an amateur). I seem to have an issue with one of my disks:
1 Currently unreadable (pending) sectors
1 Offline uncorrectable sectors
However, I'm not entirely clear on what (if anything) needs doing here. I've searched historical threads for these errors and see people post the output of their smartctl report and get tailored advice. While I would certainly appreciate that (and have attached my report here) I'm also looking for some guidance that I can follow in general to help interpret what the numbers mean and the significance, so I don't have to create a thread asking for help if something else goes wrong in the future. Is there any such guidance available? I googled but couldn't find much. Thanks for any help and recommendations!
1 Currently unreadable (pending) sectors
1 Offline uncorrectable sectors
However, I'm not entirely clear on what (if anything) needs doing here. I've searched historical threads for these errors and see people post the output of their smartctl report and get tailored advice. While I would certainly appreciate that (and have attached my report here) I'm also looking for some guidance that I can follow in general to help interpret what the numbers mean and the significance, so I don't have to create a thread asking for help if something else goes wrong in the future. Is there any such guidance available? I googled but couldn't find much. Thanks for any help and recommendations!
Code:
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00BN5A0 Serial Number: WD-WCC3F0NTKXHK LU WWN Device Id: 5 0014ee 2b6ac9712 Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed May 3 19:17:37 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 113) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 175 173 021 Pre-fail Always - 2250 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 198 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 017 017 000 Old_age Always - 61281 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 198 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 163 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1017 194 Temperature_Celsius 0x0022 109 099 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 26293 - # 2 Short offline Completed without error 00% 26218 - # 3 Short offline Completed without error 00% 26050 - # 4 Extended offline Completed without error 00% 25957 - # 5 Short offline Completed without error 00% 25883 - # 6 Short offline Completed without error 00% 22382 - # 7 Extended offline Completed without error 00% 22289 - # 8 Short offline Completed without error 00% 22214 - # 9 Short offline Completed without error 00% 21974 - #10 Extended offline Completed without error 00% 21881 - #11 Short offline Completed without error 00% 21806 - #12 Extended offline Completed without error 00% 21546 - #13 Short offline Completed without error 00% 21471 - #14 Short offline Completed without error 00% 21255 - #15 Extended offline Completed without error 00% 21162 - #16 Short offline Completed without error 00% 21087 - #17 Short offline Completed without error 00% 20919 - #18 Extended offline Completed without error 00% 20826 - #19 Short offline Completed without error 00% 20751 - #20 Short offline Completed without error 00% 20512 - #21 Extended offline Completed without error 00% 20419 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.