I'm attempting an install from USB. The install runs to the Console Setup Menu. No IP address is received. I try Option 1 - Configure Network Interfaces and no selections appear.
Here is the hardware:
MB Gigabyte-78LMT-S2P the onboard LAN is Atheros/Realtek GbE LAN chip
Router is Asus AT-68CU with DHCP server is set to Enable
I'm no expert but what I have noticed is that during the install the status light for the ethernet cable port on the router does not light nor are there any "flashing" lights on the cable connection at the MB. I tried another patch cable and no luck.
Any ideas?
Here is the hardware:
MB Gigabyte-78LMT-S2P the onboard LAN is Atheros/Realtek GbE LAN chip
Router is Asus AT-68CU with DHCP server is set to Enable
I'm no expert but what I have noticed is that during the install the status light for the ethernet cable port on the router does not light nor are there any "flashing" lights on the cable connection at the MB. I tried another patch cable and no luck.
Any ideas?