BroderLund
Cadet
- Joined
- Jan 22, 2021
- Messages
- 5
Hi there.
I'm finally building myself a TrueNAS server, however it won't boot. I only get pulsing fans and a pulsing power light. No display, no PMI, only pulsing power to the fans.
Hardware are as follows:
MB: Supermicro X9SRI-F
CPU: Intel Xeon E3-1230 V2
RAM: 4x 8GB Micron SNP96MCTC/8G
Boot SSD: 2x Kingston A400 120GB
HBA: Dell H310 (LSI 9211-8 in IT mode)
HDD 8x WD RED plus 10TB
Troubleshooting so far has been:
Any ida how to make it boot so I can install TrueNAS?
Thanks
I'm finally building myself a TrueNAS server, however it won't boot. I only get pulsing fans and a pulsing power light. No display, no PMI, only pulsing power to the fans.
Hardware are as follows:
MB: Supermicro X9SRI-F
CPU: Intel Xeon E3-1230 V2
RAM: 4x 8GB Micron SNP96MCTC/8G
Boot SSD: 2x Kingston A400 120GB
HBA: Dell H310 (LSI 9211-8 in IT mode)
HDD 8x WD RED plus 10TB
Troubleshooting so far has been:
- Remove all but one RAM stick
- Remove HBA
- Changing CR2032 battery
Any ida how to make it boot so I can install TrueNAS?
Thanks