Networking does not start until ifconfig igb0 down/up

[tkrn]

This is my configuration:

igb0 - Physical connection - No assigned IP
-vlan70 - 192.168.70.7
-vlan71 - Bridge interface for VM, no IP address
-vlan74 - 192.168.174.2

Upon reboot, I must go into the remote console and issue an ifconfig igb0 down && ifconfig igb0 up before FreeNAS starts switching packets.

This is clearly not working as intended. I'm trying to determine if this is a configuration issue or if this a bug. Any guidance is appreciated.

 

[dlavigne]

Which build version (from System -> Information)?

 

[tkrn]

FreeNAS-11.1-U2

dmidecode information

Code:

Base Board Information
		Manufacturer: ASRock
		Product Name: E3C226D2I

Processor Information
		Socket Designation: CPUSocket
		Type: Central Processor
		Family: Xeon
		Manufacturer: Intel
		ID: C3 06 03 00 FF FB EB BF
		Signature: Type 0, Family 6, Model 60, Stepping 3
		Flags:
				FPU (Floating-point unit on-chip)
				VME (Virtual mode extension)
				DE (Debugging extension)
				PSE (Page size extension)
				TSC (Time stamp counter)
				MSR (Model specific registers)
				PAE (Physical address extension)
				MCE (Machine check exception)
				CX8 (CMPXCHG8 instruction supported)
				APIC (On-chip APIC hardware supported)
				SEP (Fast system call)
				MTRR (Memory type range registers)
				PGE (Page global enable)
				MCA (Machine check architecture)
				CMOV (Conditional move instruction supported)
				PAT (Page attribute table)
				PSE-36 (36-bit page size extension)
				CLFSH (CLFLUSH instruction supported)
				DS (Debug store)
				ACPI (ACPI supported)
				MMX (MMX technology supported)
				FXSR (FXSAVE and FXSTOR instructions supported)
				SSE (Streaming SIMD extensions)
				SSE2 (Streaming SIMD extensions 2)
				SS (Self-snoop)
				HTT (Multi-threading)
				TM (Thermal monitor supported)
				PBE (Pending break enabled)
		Version: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz
		Voltage: 1.2 V
		External Clock: 100 MHz
		Max Speed: 3800 MHz
		Current Speed: 2000 MHz

/var/log/messages information

Code:

Mar  1 15:55:48 freenas-mgmt igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 18 at device 0.0 on pci1
Mar  1 15:55:48 freenas-mgmt igb0: Using MSIX interrupts with 5 vectors
Mar  1 15:55:48 freenas-mgmt igb0: Ethernet address: d0:50:99:c1:6e:4d
Mar  1 15:55:48 freenas-mgmt igb0: Bound queue 0 to cpu 0
Mar  1 15:55:48 freenas-mgmt igb0: Bound queue 1 to cpu 1
Mar  1 15:55:48 freenas-mgmt igb0: Bound queue 2 to cpu 2
Mar  1 15:55:48 freenas-mgmt igb0: Bound queue 3 to cpu 3
Mar  1 15:55:48 freenas-mgmt pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
Mar  1 15:55:48 freenas-mgmt pci2: <ACPI PCI bus> on pcib3
Mar  1 15:55:48 freenas-mgmt igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 19 at device 0.0 on pci2
Mar  1 15:55:48 freenas-mgmt igb1: Using MSIX interrupts with 5 vectors
Mar  1 15:55:48 freenas-mgmt igb1: Ethernet address: d0:50:99:c1:6e:4e
Mar  1 15:55:48 freenas-mgmt igb1: Bound queue 0 to cpu 4
Mar  1 15:55:48 freenas-mgmt igb1: Bound queue 1 to cpu 5
Mar  1 15:55:48 freenas-mgmt igb1: Bound queue 2 to cpu 6
Mar  1 15:55:48 freenas-mgmt igb1: Bound queue 3 to cpu 7

 

[dlavigne]

Is this on 11.1-U2? If so, create a report at bugs.freenas.org containing the above info and post the issue number here.

If not, try updating and let us know if that resolves the problem.

 

[wblock]

For completeness, please also describe your hardware, and also the switch being used.