hjkl950217
Dabbler
- Joined
- Feb 17, 2022
- Messages
- 11
系统: TrueNAS Scale 22.02-RC.2
I newly installed a NAS and installed trueNas Scale, I found that the network card is working in 1000m mode. My network card is 'realtek RTL8125 2.5GbE', it supports 2.5G mode. I found that Realtek official website has linux driver and tried to install it manually. Encountered error:
````
Check old driver and unload it.
rmmod r8125
Build the module and install
Warning: modules_install: missing 'System.map' file. Skipping depmod.
DEPMOD 5.10.81+truenas
load module r8125
Updating initramfs. Please wait.
update-initramfs: Generating /boot/initrd.img-5.10.81+truenas
cryptsetup: ERROR: Couldn't resolve device boot-pool/ROOT/22.02-RC.2
cryptsetup: WARNING: Couldn't determine root device
cryptsetup: WARNING: target 'md127' not found in /etc/crypttab
I: The initramfs will attempt to resume from /dev/dm-0
I: (/dev/mapper/md127)
I: Set the RESUME variable to override this.
Completed.
````
Is there any way I can install the driver to support 2.5G mode? Or wait for the Scale system update, will it be supported in the future?
realtek driver:https://www.realtek.com/en/componen...0-1000m-gigabit-ethernet-pci-express-software
I newly installed a NAS and installed trueNas Scale, I found that the network card is working in 1000m mode. My network card is 'realtek RTL8125 2.5GbE', it supports 2.5G mode. I found that Realtek official website has linux driver and tried to install it manually. Encountered error:
````
Check old driver and unload it.
rmmod r8125
Build the module and install
Warning: modules_install: missing 'System.map' file. Skipping depmod.
DEPMOD 5.10.81+truenas
load module r8125
Updating initramfs. Please wait.
update-initramfs: Generating /boot/initrd.img-5.10.81+truenas
cryptsetup: ERROR: Couldn't resolve device boot-pool/ROOT/22.02-RC.2
cryptsetup: WARNING: Couldn't determine root device
cryptsetup: WARNING: target 'md127' not found in /etc/crypttab
I: The initramfs will attempt to resume from /dev/dm-0
I: (/dev/mapper/md127)
I: Set the RESUME variable to override this.
Completed.
````
Is there any way I can install the driver to support 2.5G mode? Or wait for the Scale system update, will it be supported in the future?
realtek driver:https://www.realtek.com/en/componen...0-1000m-gigabit-ethernet-pci-express-software