Hello:
First thanks for taking the time to read and possibly help. Here's my situation
Have a Dell Poweredge T130. I installed 4 - 6 TB HGST HDDs in it. BIOS shows all drives as functioning and no issues/errors
Was able to do an install of FreeNAS from USB. Due to the issue, I did another clean install via IDRAC from the ISO mount feature.
The Boot drive is a 32 GB USB stick.
The problem:
When I go to set up my storage array, only 3 of the 4 - 6 TB HDD's is showing. I checked to make sure the boot drive truly was the USB stick and confirmed this to be the case. What could I possibly be doing wrong. BIOS shows all drives functioning but FreeNAS is not picking up one of the drives.
Thanks,
Hawkins
First thanks for taking the time to read and possibly help. Here's my situation
Have a Dell Poweredge T130. I installed 4 - 6 TB HGST HDDs in it. BIOS shows all drives as functioning and no issues/errors
Was able to do an install of FreeNAS from USB. Due to the issue, I did another clean install via IDRAC from the ISO mount feature.
The Boot drive is a 32 GB USB stick.
The problem:
When I go to set up my storage array, only 3 of the 4 - 6 TB HDD's is showing. I checked to make sure the boot drive truly was the USB stick and confirmed this to be the case. What could I possibly be doing wrong. BIOS shows all drives functioning but FreeNAS is not picking up one of the drives.
Thanks,
Hawkins