Hi All
I know this has probably been mentioned before hand and i have seen this issue a couple times but each scenario was slightly different or didn't quite match up with my specs so I am posting to be sure before I damage anything more.
TrueNAS specs
OS TrueNAS Scale, Bluefin running on two mirrored USB's
Hardware
Dell 720XD, with two E5-2650 V2, 4 x 16GB Samsung PC3-14900R ECC RAM,
12 x 6TB SAS Dell 7.2K in a RaidZ3
2 x 1TB SSD Samsung 870 EVO in a Mirror
History and Issue
Last night I updated from Angelfish to Bluefin, while I doing this I checked all my SAS drives via the shell console using
All Drives reported back as 512 bytes as need by Bluefin, (Output below)
Disk /dev/sdn: 5.46 TiB, 6001175126016 bytes, 11721045168 sectors
Disk model: MG04SCA60EE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: D9012A69-2086-4F9A-80B7-38EBB47551C5
Device Start End Sectors Size Type
/dev/sdn1 128 4194304 4194177 2G Linux swap
/dev/sdn2 4194432 11721045134 11716850703 5.5T Solaris /usr & Apple ZFS
This morning I powered backup TrueNAS (Powered it down once it had finished because I was not able to leave it running due to needing to change the UPS out) and I noticed that my RaidZ3 was degraded and one drive is showing up as name: 3869088571791395513 Status UNAVAIL. When I use the Replace disk feature I can see the original disk that was there " sdb " but when I go to use the replace drive or force replace drive I get the blow error
Error: [EFAULT] Unable to GPT format the disk "sdb": Warning! Read error 5; strange behavior now likely! Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning! Read error 5; strange behavior now likely! Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Unable to save backup partition table! Perhaps the 'e' option on the experts' menu will resolve this problem. Warning! An error was reported when writing the partition table! This error MIGHT be harmless, or the disk might be damaged! Checking it is advisable.
close
Please also note drive sdb (the one showing the error above, Has been working fine for the last 2 months, only throw that error after Bluefin upgrade
Is anyone able to point me in the right direction for getting this fixed?
first time having a drive fail in TrueNAS.
I know this has probably been mentioned before hand and i have seen this issue a couple times but each scenario was slightly different or didn't quite match up with my specs so I am posting to be sure before I damage anything more.
TrueNAS specs
OS TrueNAS Scale, Bluefin running on two mirrored USB's
Hardware
Dell 720XD, with two E5-2650 V2, 4 x 16GB Samsung PC3-14900R ECC RAM,
12 x 6TB SAS Dell 7.2K in a RaidZ3
2 x 1TB SSD Samsung 870 EVO in a Mirror
History and Issue
Last night I updated from Angelfish to Bluefin, while I doing this I checked all my SAS drives via the shell console using
Code:
# fdisk -1 /dev/sd(Drive Letter)
All Drives reported back as 512 bytes as need by Bluefin, (Output below)
Disk /dev/sdn: 5.46 TiB, 6001175126016 bytes, 11721045168 sectors
Disk model: MG04SCA60EE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: D9012A69-2086-4F9A-80B7-38EBB47551C5
Device Start End Sectors Size Type
/dev/sdn1 128 4194304 4194177 2G Linux swap
/dev/sdn2 4194432 11721045134 11716850703 5.5T Solaris /usr & Apple ZFS
This morning I powered backup TrueNAS (Powered it down once it had finished because I was not able to leave it running due to needing to change the UPS out) and I noticed that my RaidZ3 was degraded and one drive is showing up as name: 3869088571791395513 Status UNAVAIL. When I use the Replace disk feature I can see the original disk that was there " sdb " but when I go to use the replace drive or force replace drive I get the blow error
Error: [EFAULT] Unable to GPT format the disk "sdb": Warning! Read error 5; strange behavior now likely! Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning! Read error 5; strange behavior now likely! Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Unable to save backup partition table! Perhaps the 'e' option on the experts' menu will resolve this problem. Warning! An error was reported when writing the partition table! This error MIGHT be harmless, or the disk might be damaged! Checking it is advisable.
close
Please also note drive sdb (the one showing the error above, Has been working fine for the last 2 months, only throw that error after Bluefin upgrade
Is anyone able to point me in the right direction for getting this fixed?
first time having a drive fail in TrueNAS.
Last edited by a moderator: