em driver init error after upgrade 13.1-RELEASE-p9

nagual3

Cadet
Joined
Apr 3, 2024
Messages
4
Hello.
I recently upgraded to 13.1-RELEASE-p9
After the upgrade I started getting an error when initialising the network adapters
em0: link state changed to UP debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff80004731800), ignoring. em1: link state changed to UP debugnet_any_ifnet_update: Bad dn_init result from em1 (ifp 0xfffff80004732800), ignoring. em2: link state changed to UP debugnet_any_ifnet_update: Bad dn_init result from em2 (ifp 0xfffff8000485f800), ignoring. em3: link state changed to UP debugnet_any_ifnet_update: Bad dn_init result from em3 (ifp 0xfffff80004733800), ignoring. em4: link state changed to UP debugnet_any_ifnet_update: Bad dn_init result from em4 (ifp 0xfffff80004860800), ignoring.
The em0 is the inbuilt network adapter and the rest are dual port network cards.
This error did not happen before.
[root@truenas /]# lspci |grep Eth 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) 02:00.0 Ethernet controller: Intel Corporation 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications) (rev 06) 02:00.1 Ethernet controller: Intel Corporation 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications) (rev 06) 03:00.0 Ethernet controller: Intel Corporation 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications) (rev 06) 03:00.1 Ethernet controller: Intel Corporation 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications) (rev 06)
 

nagual3

Cadet
Joined
Apr 3, 2024
Messages
4
em0: Interface stopped DISTRIBUTING, possible flapping em4: Interface stopped DISTRIBUTING, possible flapping em3: Interface stopped DISTRIBUTING, possible flapping em2: Interface stopped DISTRIBUTING, possible flapping em1: Interface stopped DISTRIBUTING, possible flapping lagg0: link state changed to DOWN lagg0: link state changed to UP
 
Top