"Web interface could not be accessed" after hardware upgrade

[kdombrovsky]

Hi All,

I've recently upgraded my hardware from an early 2010s AMD machine to a bit newer Intel machine.
It booted up fine but I'm getting "The web interface could not be accessed" message.
Tried resetting the built in NICs - no luck.
Also tried a PCIe Intel NIC with the same result :(

Seeing this in dmesg

em0: ‹Intel(R) Gigabit CT 82574L> port Oxd000-0x01 men Oxf4c0000-0xdf4dffff,6xdf400000-6xd4711f1,
...
debugnet_ant_i fnet_update: Bad dn_init result from eme (ifp Oxff+800011b000, ignoring.

It also seems that none of my pools connected via an HBA got imported...

 

[kdombrovsky]

Ok, plugging the HBA card into a different PCIe slot solved the problem however still no network

 

[Arwen]

Did you reconfigure your network to use the new system board's NIC, from the console using the TUI?

From your wording, "Tried resetting the built in NICs - no luck.", it is not clear.


(TUI = Text User Interface, in this case, part of TrueNAS.)

 

[kdombrovsky]

Did you reconfigure your network to use the new system board's NIC, from the console using the TUI?

From your wording, "Tried resetting the built in NICs - no luck.", it is not clear.


(TUI = Text User Interface, in this case, part of TrueNAS.)

It turned out that it's easier to just do a fresh TrueNAS install than to troubleshoot. Thanks for trying to help!

 

[Arwen]

Well, glad it is solved.