russellseymour
Cadet
- Joined
- Jun 18, 2020
- Messages
- 9
My FreeNAS machine rebooted last night, I am not sure why but I am guessing it was a brief power cut due to storms.
The problem I have is that one of the ZFS pools will not mount, this is the output from "zpool import":
As can be seen the disks are ONLINE, but it cannot find the replicas it needs.
My other two pools are working without issue:
Is there anyway that I can make FreeNAS finds its replicas so I can mount the pool?
If this cannot be done can I mount one of the disks so I can at least take an up to date backup of the data on there?
I am more than happy to provide the 'Information' about my FreeNAS setup but I cannot find in the GUI where this info is :(.
The machine I am running on has 16Gb RAM and the CPU is a 'Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz'
Happy to provide more information if needed. Thanks for any help.
The problem I have is that one of the ZFS pools will not mount, this is the output from "zpool import":
Code:
pool: storage02 id: 2588794960955536546 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://illumos.org/msg/ZFS-8000-3C config: storage02 UNAVAIL insufficient replicas mirror-0 ONLINE gptid/49ff4c71-74f0-11e6-81ea-94de80678aa1 ONLINE gptid/4b1cf3b4-74f0-11e6-81ea-94de80678aa1 ONLINE 16534644111877360144 UNAVAIL cannot open
As can be seen the disks are ONLINE, but it cannot find the replicas it needs.
My other two pools are working without issue:
Code:
pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0 days 00:03:59 with 0 errors on Thu Jun 18 03:48:59 2020 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors pool: storage01 state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0 in 0 days 05:29:52 with 0 errors on Sun May 17 05:29:54 2020 config: NAME STATE READ WRITE CKSUM storage01 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/74cd5025-8c1e-11e2-9e97-001d7de623a5 ONLINE 0 0 0 gptid/77e72d51-8c1e-11e2-9e97-001d7de623a5 ONLINE 0 0 0 gptid/7affddfc-8c1e-11e2-9e97-001d7de623a5 ONLINE 0 0 0 gptid/7e1ba968-8c1e-11e2-9e97-001d7de623a5 ONLINE 0 0 0 errors: No known data errors
Is there anyway that I can make FreeNAS finds its replicas so I can mount the pool?
If this cannot be done can I mount one of the disks so I can at least take an up to date backup of the data on there?
I am more than happy to provide the 'Information' about my FreeNAS setup but I cannot find in the GUI where this info is :(.
The machine I am running on has 16Gb RAM and the CPU is a 'Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz'
Happy to provide more information if needed. Thanks for any help.