dlobel
Dabbler
- Joined
- Feb 19, 2021
- Messages
- 32
Hello,
I'm trying to boot TrueNAS from an USB stick. I've tried on 4 types USB sticks but i keep getting stuck at the same position. Whatever I try, my system always freezes after the masks info is shown after loading the kernal. I've created the USB sticks with RUFUS under Windows 10 and with DD on MacOS. I've tried different versions of FreeNAS (9, 11 and 12) but no success.
My target system is an HP Prodesk 400 G5. I've updated my BIOS to the latest version and my BIOS is booting in EUFI mode (Legacy enabled, security is off).
Currently I'm lost.
I'm trying to boot TrueNAS from an USB stick. I've tried on 4 types USB sticks but i keep getting stuck at the same position. Whatever I try, my system always freezes after the masks info is shown after loading the kernal. I've created the USB sticks with RUFUS under Windows 10 and with DD on MacOS. I've tried different versions of FreeNAS (9, 11 and 12) but no success.
My target system is an HP Prodesk 400 G5. I've updated my BIOS to the latest version and my BIOS is booting in EUFI mode (Legacy enabled, security is off).
Currently I'm lost.
- Motherboard make and model: HP Prodesk 400
- CPU make and model: Interl core i5
- RAM quantity: 8GB
- Hard drives: 1x VME 256GB and 1x SSD 1TB
- Hard disk controllers: VMWE and SATA
- Network cards: Interl 1GB ethernet