HP Probook 400 G4 mini Desktop

[pbecks1963nr2]

Hello y'all,

I am new to Truenas/Freenas

I want to install it on a HP Probook 400 G4. I formated a usb-stick (fat32) and flashed TrueNAS-12.0-U3 onto it with balenaEtcher. On the probook (bios) i disabled legacy support and secure boot. The stick will boot and i am able to choose: install. After that i get the following messages (and the machine freezes)

(below is taken over from a bad screenshot, sorry, not 100% accurate)

can't find /etc/hostid
can't find openzfs
can't find /boot/entropy
Start @ 0xffffffff80370000 ...
EFI framebuffer information:

addr,size 0xb0000000, 0x7e9000
dimensions 1920 x 1080
stride 19290
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000


Any ideas?

Thnx!

 

[pbecks1963nr2]

Perhaps i should enable legacy support.. (will do that next)

[update]

Didn't help. I also updated the bios and did a rollback of the bios. None helped.

[update]

I am able to install ubuntu/OMV on this pc using a usb-stick so....

[update]

Tried again using RUFUS, MBR and disable Uefi in the Bios...