blckhm
Dabbler
- Joined
- Sep 24, 2018
- Messages
- 42
Hi guys,
Tonight, I updated my MainReplica from 12.0-RELEASE to 12.0-U1 update. After reboot, system stucks during boot screen.
Here is some details;
Chasis: Dell R730xd
CPU: 1x Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz
RAM: 128G
OS: ESXi 6.7.0U3
HBA: Dell HBA330 mini (Passthrough)
During bootup screen, it stucks with Last line in console such as "mpr0: Reinitializing controller".
After some research, I found something about X2Apic mode on this thread : https://www.truenas.com/community/t...d-stuck-mpr0-reinitializing-controller.85999/
I'll try asap but now, I set active boot env. to 12.0 RELEASE back and it works.
X2Apic already disabled on my system since it was installed.
So I could not update my truenas to 12.1 but 12.0 looks fine for now.
Here is some info.
Tonight, I updated my MainReplica from 12.0-RELEASE to 12.0-U1 update. After reboot, system stucks during boot screen.
Here is some details;
Chasis: Dell R730xd
CPU: 1x Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz
RAM: 128G
OS: ESXi 6.7.0U3
HBA: Dell HBA330 mini (Passthrough)
Code:
Adapter Selected is a Avago SAS: SAS3008(C0) Controller Number : 0 Controller : SAS3008(C0) PCI Address : 00:03:00:00 SAS Address : 5d09466-0-92d9-8600 NVDATA Version (Default) : 0e.00.00.36 NVDATA Version (Persistent) : 0e.00.00.36 Firmware Product ID : 0x2221 (IT) Firmware Version : 15.15.06.00 NVDATA Vendor : LSI NVDATA Product ID : Dell HBA330 Mini BIOS Version : 08.35.02.00 UEFI BSD Version : 17.07.01.00 FCODE Version : N/A Board Name : Dell HBA330 Mini Board Assembly : N/A Board Tracer Number : N/A
During bootup screen, it stucks with Last line in console such as "mpr0: Reinitializing controller".
After some research, I found something about X2Apic mode on this thread : https://www.truenas.com/community/t...d-stuck-mpr0-reinitializing-controller.85999/
X2Apic already disabled on my system since it was installed.
So I could not update my truenas to 12.1 but 12.0 looks fine for now.
Here is some info.
Last edited: