Register for the iXsystems Community to get an ad-free experience and exclusive discounts in our eBay Store.

ipmi

Western Digital Drives - The Preferred Drives of FreeNAS and TrueNAS CORE
  1. zenon1823

    SOLVED IPMI (SOL) Console Redirection Issues & GUI Enable Serial Console - Port Not Available

    I have been working on this for 2 days and have exhausted every post here and in several freeBSD forums trying to figure this out and I'm out of ideas. I am working on a new build with no configuration or data so I can try anything suggested. Once this system is installed and working properly...
  2. scrappy

    SOLVED Upgrade to FreeNAS 11.2-U4.1 broke shell access

    I noticed the other day that after upgrading from 11.2-U3 to 11.2-U4.1 that it broke console access in IPMI. All I get is a blank screen. Then I noticed the Shell menu item in the FreeNAS GUI was also inactive and did nothing when I clicked it. Luckily, I do have SSH access so at least there's...
  3. nickt

    SOLVED Supermicro IPMI: Invalid Username or Password

    Hi all, Just setting up a new (second hand) X10SLM+-F board. Still running memtests - all going well so far. In the IPMI, I'm getting an "Invalid Username or Password" error logged every ten seconds. I've updated to latest IPMI firmware and BIOS, and have reset all IPMI / BIOS config before...
  4. N

    BUILD General purpose server: advice on how to make the most of my hardware with freenas

    Hello, I'm here to ask you for advice on how to proceed with the software configuration of my machine in order to reach the best compromise between versatility and security. I have already purchased the following configuration: S.M.: SuperMicro X11SCa-F (HDMI, USB 3.0 \3.1 type C, IPMI) CPU...
  5. T

    Boot hang: IPMI system interface?

    I have recently put together a small NAS from the following components: Motherboard: DFI-ITOX BE171 (AMD AMD RX-427BB SoC) DRAM: 2x Micron 8GB PC3L-14900S 1866 MHz DDR3L SODIMM SSD: Micron M600 MSATA 64GB RAID controller: Startech PEXSAT34RH (Marvell 88SE9230) HDD: 4x 3TB HGST (HUS724030ALE641)...
  6. C

    Good idea to upgrade IPMI BMC firmware on Supermicro X10SLM?

    I bought a used Supermicro X10SLM motherboard. The IPMI BMC firmware version is 1.10. Is it a good idea or recommended to update the IPMI BMC firmware to the latest version? From what I was reading in the upgrade tool instructions there is no way to downgrade back to the 1.x firmware if there is...
  7. cronsloth

    IPMI not dependable with and LACP (LAG)

    I'm not entirely sure if this is a known issue or just me not knowing all the underpinnings of how IPMI functions. But Here is my issue if anyone has any insight. I have a SuperMicro Server w/IPMI: Product Name: X9DRL-3F/iF I also have 'LAGG' configured to port bond my two NIC's on the...
  8. echeng

    FreeNAS Mini XL unresponsive, reported ipmi0 error 5f before dying

    Hello -- My FreeNAS Mini XL reported an ipmi0 error 5f and "ipmi0 KCS: Read failed on byte 7" in console, and was unresponsive over the network via http, ssh or ping. I finally had to power it down. To try to recover: 1. I removed power cable for 20 seconds and plugged it back in. The fan spun...
  9. A

    CPU Temp Reporting LARGE difference: IPMI/BIOS vs. FreeNAS - Supermicro X11 SSL-F & Intel E3 1245 v6

    Hi All, Since there are a number of people that know the Supermicro X11 series motherboards I hope that you guys can help, but I wouldn't call this a FreeNAS problem per se since I personally believe that FreeNAS is the only thing on the machine reporting the correct CPU temp... I build a...
  10. Chase Turner

    FreeNAS 11.0 on FreeNAS Mini XL: how to disable IPMI?

    my FreeNAS Mini XL has two network interfaces - igb0 and igb1. igb0 has the IPMI controller. My goal is to * (a) disable IPMI entirely on igb0; or * (b) configure igb0 and igb1 to be on different subnets with each having a dedicated ethernet back to my pfSense firewall. Then, configure...
  11. Guinea

    IPMI Configuration to Setup FreeNAS

    I have a NAS I am building. The hardware is a supermicro chassis and a supermicro motherboard. I have a 16G USB stick with the FreeNAS iso (11) burned on it. I have a Samsung 120GB Evo 850 SSD for the boot drive. I want to use my PC to maintain and setup the FreeNAS installation. I was...
  12. P

    New build--want to control more fans

    The parts are on the way for my new build, which will be based on the Supermicro X11SSH-F motherboard. This board has 4-pin connectors for 4 chassis fans and the CPU fan (FAN1-FAN4, FANA). My case, a CoolerMaster HAF32 has 4 stock fans. However, I will need to put some of my drives in the 5 1/4"...
  13. Nerdlinger

    ipmi0 failure - do i even care?

    Well, i have my first freenas set up. Right now, all I have is the server and a usb key. I do not yet have any disks or zpools. those should be arriving shortly. It all works well. so far Last night I actually received my first email alert (Yay, SNMP works) Unfortunately, i have no idea...
  14. N

    SOLVED ASRock C2550d4i FUBAR

    ok so this was my first time using this board. I installed it, and tried to boot only to have it stuck on "System initializing..." I was, initially, able to access IPMI. Here's were I Fd up. I tried to do a firmware update. But the HTTP wasn't set up and asked me to upload a file. I canceled...
  15. J

    ASRock C2550D4I networking problems.

    So to start off with I'm having problems connecting to FreeNAS via the web GUI on my NAS. I've tried setting the EFI and IPMI we settings back to defaults and neither has resolved my FreeNAS connection issue. I've got 2 Ethernet cables one plugged into the IPMI port and one plugged into the LAN...
Top