Freenas server to windows 10 client via 10Gb sfp+ copper. In the past I've used s320e-cr chelsio cards on both server and client. Every so often the client crashes with bsod(blue screen) with tcpip.sys failure when browsing the server or copying FROM the server to client. However I can copy to...

Ok, so let's start by saying I don't work with this stuff for a job and it's basically all brand new to me. After some time fighting things I have finally gotten everything set up and running(I think, it's only been a couple hours). I wanted to make a post documenting the struggles I had and the...

Hi, I recently bought 10G Network Kit (2x Chelsio N320E 10Gbit + 1x3m SFP+ 10GBe Cisco cable) for my FreeNAS box (Supermicro H8SCM-F). At the moment my router (MikroTik RB4011iGS+RM) has one SFP+ port so tried to connect both, so I could backup few of my computers at the same time through the...

Hello! I have been trying to add 10g network connections between my primary FreeNAS and my ESXi box. I am trying to provide iSCSI storage to ESXi according to these instructions: http://johnkeen.tech/freenas-11-iscsi-esxi-6-5-lab-setup/ The main difference is I'm using dual 10g links instead...

Hi guys - it's me again. Was just checking back to see if anyone else had tried playing around with TOE/iSCSI acceleration on the Chelsio cards lately. I am attempting to do some tinkering around with it, however I'm finding that even TOE functionality looks like it's disabled somewhere out of...

Hi friends, I bought a Chelsio T520-SO-CR off ebay. What showed up doens't look anything like pictures I've seen. I cannot find any info when I put in what I think is the board revision number or the Part Number. (110-1188-50 Rev A or PT2170820) MAC:00:07:43:3E:AC:C8 I've included some pics...

I'm adding 10GBE switch to my network. It's the US-48 by ubiquity. It has 2 10GBE SPF+ ports. I'm reading that the Chelsio T520-so-cr is one of the recommended cards to use. So my setup would be: Ubiquity Switch spf+ connected to Chelsio T520-so-cr. Here is the card I plan to purchase...

I'm setting up a temporary 2nd server to troubleshoot my primary NAS :p :rolleyes: . To do this I've kicked the system SSD and VGA card out of a spare Hyper-V server (it's the only other Supermicro/Xeon/ECC platform that I can easily free up for a few days). The server is ideal for FreeNAS -...

Good morning, I have a suggestion for the failover LAGG feature to address what I would consider a bug. Specifically, my 10GBe interface from iXsystems (i.e. private-labeled Chelsio 520) is currently not functioning after receiving/installing a replacement motherboard for the mini XL (AVR54...

In my sdetup, I'm using dual-port Chelsio 10G cards throughout my home lab (Chelsio T420-CR and a few T420-LL-CR's, the low latency version, specifically). FreeNAS 9.10.2U3 - soon to be 11RC - is on its own physical server and shares datasets and zvols on Samba and iSCSI respectively. The main...

So I joined the forums because everything used to work great on 9... 3-10... My hardware is a custom built box with an Intel Server board S1200V3RP, Xeon 1245, 32 GB Crucial ECC DDR3-1600, 9211-8i controller, 6x WD Red 4.0TB, 2x WD Gold 4.0TB, an Intel Dual NIC card, and Chelsio 320-SR card...

I'm running a clean install of FreeNAS 9.10.1-U4 and it's not loading the driver for the T420-BT NIC at boot up. I have 2 questions I'm hoping someone can help me with. Why? and can I manually load the driver? How can I fix this in the long term? I'm actually having the same problem on a...

Hello All, We have been using FreeNAS for the past year to help us handle RAW Video Assets during Post Production. Basically a big "Bit Bucket" to keep assets on a Nearline storage system and off of the high performance SAN until needed. This is the first time I am posting on the forums but...