can't get into the truenass system

[wahyu_septiawan]

i have server HP Proloant DL380 Gen 9 2U with spesification :
2 x intel processor Xeon E5-2690
SSD 1 TB
HDD 2 x 18TB
Memory 8 x 32GB

on the SSD there is already Trunas OS from the previous server. I'm using the old SSD from the previous server for this new server.
but the existing 1TB SSD trunass on the new server, can't enter the system

with error message :

Solaris: NOTICE: Cannot find the pool label for 'boot-pool'
Mounting from zfs:boot-pool/ROOT/default failed with error 5.

Loader Variabel:
vfs.root.mountfrom=zfs:boot-pool/ROOT/default

manual root filesystem specification:
<fstype>:<device>[options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list

eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9668:/dev/cd0 ro
(which is equivalent to: mount -t cd9668 -o ro /dev/cd0 /)

? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input

How to solved this error ??

I've tried to reinstall the existing SSD Trunas using a Bootable USB. but with the same error message as above

 

[sretalla]

Sounds like you could try dropping to a command line in the installer and using dd if=/dev/zero of=/dev/da0 bs=1M count=32 (assuming da0 is the boot pool drive you wanted to use).

 

[wahyu_septiawan]

Sounds like you could try dropping to a command line in the installer and using dd if=/dev/zero of=/dev/da0 bs=1M count=32 (assuming da0 is the boot pool drive you wanted to use).

then what is the solution I have to do

 

[sretalla]

That should put the disk into a "clean state" so you can install to it.

 

[wahyu_septiawan]

Thanks bro @retalla atas respon dan informasinya. server hp dl380 gen 9 saya sudah bisa di install truenass.

pemecahan masalah yang saya lakukan:
1. perkenalkan atau daftarkan identitas harddisk ke server hp dl380 gen 9
2. SSD yang sudah terpasang truenass di server lama. pada server dl380 gen 9 tidak akan bisa masuk ke sistem truenass karena perbedaan identifikasi pada server dl380 adalah da0 sedangkan pada server lama tidak da0.
3. Instal ulang truenass pada dl380 dengan UEFI, tergantung pada perangkat atau server Anda yang mendukung UEFI atau Legacy.
4. disini saya menggunakan truenass bootable dengan flashdisk, burning/buat bootable menggunakan rufus.
5. pastikan booting pertama pada flashdisk/USB disk yang sudah terinstall adalah truenass bootable, boot disk kedua akan terisi dengan truenass OS.