Hi all, thanks in advance for reading this post and for trying to help.
(Details of full hardware hardware at the bottom of post)
I have a storage configuration of 4 pools of 1 Vdev in each containing 4 drives. Three of these pools are healthy but I have lost a drive in one of them. After a restart instead of a degraded pool, the whole pool is offline. It is recognized in the early "boot" message but the GUI just shows it as offline with no information, unsurprisingly the pool is also not listed when I do a zpool status from the command line.
When I look in the GUI 3 of the 4 drives in the missing pool are showing as "disks" but with no but with a pool of "N/A", and its showing 2 partitions on each of them available when I go to import disk.
I did a search of the forum but count not find anything relevant, Just after some advice on what to do next, I have seen way too many posts where incorrect actions were taken that could not be reversed.
Server Details
Supermicro X11SAE with Intel(R) Xeon(R) CPU E3-1225 v6 @ 3.30GHz
32gb Ram
Syba SI-PEX40137 HBA
96 TB Raw storage over 4 pools with 4 disks each in RaidZ1
Mirrored 120gb SSD for boot
(Details of full hardware hardware at the bottom of post)
I have a storage configuration of 4 pools of 1 Vdev in each containing 4 drives. Three of these pools are healthy but I have lost a drive in one of them. After a restart instead of a degraded pool, the whole pool is offline. It is recognized in the early "boot" message but the GUI just shows it as offline with no information, unsurprisingly the pool is also not listed when I do a zpool status from the command line.
When I look in the GUI 3 of the 4 drives in the missing pool are showing as "disks" but with no but with a pool of "N/A", and its showing 2 partitions on each of them available when I go to import disk.
I did a search of the forum but count not find anything relevant, Just after some advice on what to do next, I have seen way too many posts where incorrect actions were taken that could not be reversed.
Server Details
Supermicro X11SAE with Intel(R) Xeon(R) CPU E3-1225 v6 @ 3.30GHz
32gb Ram
Syba SI-PEX40137 HBA
96 TB Raw storage over 4 pools with 4 disks each in RaidZ1
Mirrored 120gb SSD for boot