I have some HDs in my system and i have run several older smart tests on them on other operating systems some time ago.
But when i click on one HD to show me the SMART Test Results it says "No Data to display".
The same happens, after starting some new manual SMART Tests via the Webinterface of TrueNAS-12.0-U1.1
And there is one more problem with SMART on TrueNAS:
My SSD isn't recognized for SMART Tests.
From my Linux operating system, i know, that i had to specify a special device type for the smartctl command line tool to make it work on that SSD.
I can't remember if it was --device=nvme or --device=sat, but i know that it didn't work with auto detection.
The Webinterface of truenas also fails. I assume it tries to use auto detection which doesn't work.
The error message ist:
The SSD Model is an INTEL SSDPEKKF256G8
But when i click on one HD to show me the SMART Test Results it says "No Data to display".
The same happens, after starting some new manual SMART Tests via the Webinterface of TrueNAS-12.0-U1.1
And there is one more problem with SMART on TrueNAS:
My SSD isn't recognized for SMART Tests.
From my Linux operating system, i know, that i had to specify a special device type for the smartctl command line tool to make it work on that SSD.
I can't remember if it was --device=nvme or --device=sat, but i know that it didn't work with auto detection.
The Webinterface of truenas also fails. I assume it tries to use auto detection which doesn't work.
The error message ist:
Code:
result = await self.middleware._call(message['method'], serviceobj, methodobj, params, app=self, File "/usr/local/lib/python3.8/site-packages/middlewared/main.py", line 1195, in _call return await methodobj(*prepared_call.args) File "/usr/local/lib/python3.8/site-packages/middlewared/schema.py", line 973, in nf return await f(*args, **kwargs) File "/usr/local/lib/python3.8/site-packages/middlewared/plugins/smart.py", line 398, in manual_test verrors.check() File "/usr/local/lib/python3.8/site-packages/middlewared/service_exception.py", line 62, in check raise self middlewared.service_exception.ValidationErrors: [EINVAL] disks.0.identifier: Test cannot be performed for {serial_lunid}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX disk. NVMe devices cannot be mapped yet. [EINVAL] disks.0.identifier: Test cannot be performed for {serial_lunid}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX. Unable to retrieve disk details.
The SSD Model is an INTEL SSDPEKKF256G8