I've got 5x3TB WD Red drives that I'm slowly replacing with 5x5TB Toshiba drives. My mobo has 6 SATA ports, so I'm doing it by plugging in one new drive, resilvering, then taking out the old drive and moving onto the next one. The first two went fine, but on the third one I moved the in-used 3TB drive to a new port and put a 5TB in its place. When I booted, I got a bunch of these errors:
I turned the machine off and tried to reseat the cables on the affected drive (which is the 3TB one I moved). Still getting the errors. SMART indicates no problems. I ran a short self-test with no errors. A long test is running right now
Here's the output of smartctl -x -q no serial /dev/ada0:
It's resilvering right now:
Does this suggest the drive might be going bad? Or maybe the cable is bad? Or the motherboard?
Code:
Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 10 90 a0 50 40 5d 01 00 00 00 00 Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): Retrying command Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 01 ae a3 50 40 5d 01 00 00 00 00 Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error Dec 7 19:36:34 mickey (ada0:ahcich0:0:0:0): Retrying command
I turned the machine off and tried to reseat the cables on the affected drive (which is the 3TB one I moved). Still getting the errors. SMART indicates no problems. I ran a short self-test with no errors. A long test is running right now
Here's the output of smartctl -x -q no serial /dev/ada0:
Code:
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68N32N0
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Dec 7 21:03:57 2019 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: (33120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 352) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 165 165 021 - 6708
4 Start_Stop_Count -O--CK 100 100 000 - 26
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 086 086 000 - 10516
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 26
192 Power-Off_Retract_Count -O--CK 200 200 000 - 9
193 Load_Cycle_Count -O--CK 200 200 000 - 33
194 Temperature_Celsius -O---K 120 113 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 56 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 90% 10516 -
# 2 Short offline Completed without error 00% 10516 -
# 3 Short offline Interrupted (host reset) 10% 10516 -
# 4 Short offline Completed without error 00% 10515 -
# 5 Extended offline Completed without error 00% 10389 -
# 6 Short offline Completed without error 00% 10257 -
# 7 Extended offline Completed without error 00% 24 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 29/31 Celsius
Lifetime Min/Max Temperature: 24/37 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (75)
Index Estimated Time Temperature Celsius
76 2019-12-07 13:06 33 **************
... ..( 77 skipped). .. **************
154 2019-12-07 14:24 33 **************
155 2019-12-07 14:25 32 *************
... ..( 41 skipped). .. *************
197 2019-12-07 15:07 32 *************
198 2019-12-07 15:08 33 **************
... ..( 61 skipped). .. **************
260 2019-12-07 16:10 33 **************
261 2019-12-07 16:11 32 *************
... ..( 68 skipped). .. *************
330 2019-12-07 17:20 32 *************
331 2019-12-07 17:21 31 ************
... ..( 42 skipped). .. ************
374 2019-12-07 18:04 31 ************
375 2019-12-07 18:05 30 ***********
... ..( 57 skipped). .. ***********
433 2019-12-07 19:03 30 ***********
434 2019-12-07 19:04 ? -
435 2019-12-07 19:05 29 **********
436 2019-12-07 19:06 29 **********
437 2019-12-07 19:07 ? -
438 2019-12-07 19:08 29 **********
439 2019-12-07 19:09 ? -
440 2019-12-07 19:10 29 **********
441 2019-12-07 19:11 29 **********
442 2019-12-07 19:12 29 **********
443 2019-12-07 19:13 30 ***********
... ..( 67 skipped). .. ***********
33 2019-12-07 20:21 30 ***********
34 2019-12-07 20:22 31 ************
... ..( 11 skipped). .. ************
46 2019-12-07 20:34 31 ************
47 2019-12-07 20:35 30 ***********
48 2019-12-07 20:36 33 **************
... ..( 26 skipped). .. **************
75 2019-12-07 21:03 33 **************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 26 --- Lifetime Power-On Resets
0x01 0x010 4 10516 --- Power-on Hours
0x01 0x018 6 22491831389 --- Logical Sectors Written
0x01 0x020 6 562725686 --- Number of Write Commands
0x01 0x028 6 168023015275 --- Logical Sectors Read
0x01 0x030 6 952990205 --- Number of Read Commands
0x01 0x038 6 3497861632 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 10461 --- Spindle Motor Power-on Hours
0x03 0x010 4 10461 --- Head Flying Hours
0x03 0x018 4 43 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 1 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 9 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 32 --- Average Short Term Temperature
0x05 0x018 1 28 --- Average Long Term Temperature
0x05 0x020 1 37 --- Highest Temperature
0x05 0x028 1 18 --- Lowest Temperature
0x05 0x030 1 35 --- Highest Average Short Term Temperature
0x05 0x038 1 19 --- Lowest Average Short Term Temperature
0x05 0x040 1 33 --- Highest Average Long Term Temperature
0x05 0x048 1 22 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 201 --- Number of Hardware Resets
0x06 0x010 4 83 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 26 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 26 R_ERR response for host-to-device data FIS
0x0005 2 10 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 10 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 28 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 30 Device-to-host register FISes sent due to a COMRESET
0x000b 2 34 CRC errors within host-to-device FIS
0x000d 2 2 Non-CRC errors within host-to-device FIS
0x000f 2 26 R_ERR response for host-to-device data FIS, CRC
0x0012 2 8 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 5420 Vendor specificIt's resilvering right now:
Code:
pool: Media-pool
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Sat Dec 7 19:46:21 2019
2.72T scanned at 602M/s, 1.78T issued at 395M/s, 10.4T total
364G resilvered, 17.07% done, 0 days 06:23:11 to go
config:
NAME STATE READ WRITE CKSUM
Media-pool DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
gptid/93167540-1915-11ea-8fec-0cc47a0128c1 ONLINE 0 0 0
gptid/454e0a58-17ca-11ea-a5c1-0cc47a0128c1 ONLINE 0 0 0
gptid/c530b0ff-f7f1-11e7-b8a6-0cc47a0128c1 ONLINE 0 0 0
gptid/c5fc40e4-f7f1-11e7-b8a6-0cc47a0128c1 ONLINE 0 0 0
replacing-4 FAULTED 0 0 0
gptid/eec234f6-c031-11e8-afc1-0cc47a0128c1 FAULTED 0 0 0 too many errors
gptid/845a46c5-195c-11ea-9ec7-0cc47a0128c1 ONLINE 0 0 0
errors: No known data errorsDoes this suggest the drive might be going bad? Or maybe the cable is bad? Or the motherboard?
