brownj
Cadet
- Joined
- Nov 2, 2019
- Messages
- 7
So 5 or 6 days ago i had a drive fault ( RaidZ1 , w online spare)
I offlined the drive , powered down and replaced the drive with a new WD-Red 4TB , after powering
back up, in the gui i did a replace ( selecting the only drive that showed up in the dropdown ( sdc i think)
resilver took place , everthing then looks good.
At this point i expected the hot-spare which is temporary to revert back and show up in the spare group
but mine still showed UNAVAIL
a couple days later i have another drive fault , basically followed same steps as above, offline drive
power down , replace drive with another new WD-RED 4TB , power back up , 'replace' again in the gui
interface , and another resilver process.
So now my pool status is thus:
any idea what i do to make this HEALTHY again ??
I offlined the drive , powered down and replaced the drive with a new WD-Red 4TB , after powering
back up, in the gui i did a replace ( selecting the only drive that showed up in the dropdown ( sdc i think)
resilver took place , everthing then looks good.
At this point i expected the hot-spare which is temporary to revert back and show up in the spare group
but mine still showed UNAVAIL
a couple days later i have another drive fault , basically followed same steps as above, offline drive
power down , replace drive with another new WD-RED 4TB , power back up , 'replace' again in the gui
interface , and another resilver process.
So now my pool status is thus:
Code:
pool: data-pool state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J scan: resilvered 524G in 02:29:39 with 0 errors on Sun Oct 2 17:25:37 2022 config: NAME STATE READ WRITE CKSUM data-pool DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 spare-0 DEGRADED 0 0 0 c67c4bdc-91dc-4c14-8f34-15504a4c0f57 ONLINE 0 0 0 4162934543819156499 UNAVAIL 0 0 0 was /dev/sde 71800691-a44f-41e2-b5db-a04c6b3eb0c4 ONLINE 0 0 0 1ea5da57-9e44-11eb-bf24-2cf05da31333 ONLINE 0 0 0 spares sde UNAVAIL errors: No known data errors
any idea what i do to make this HEALTHY again ??