Upgrading Storage, MG09ACA?

[FlyingPersian]

I've started resilvering about 36h ago (8 TB drive replaced by 18 TB drive). About 10h ago it was at 17%, now it's at 2%. Is that normal?

Output of zpool status -v:

It says in progress since December 16th 9:34 am, which is 50mins ago. Is that maybe the second step of resilvering?

 

[FlyingPersian]

Hm it keeps restarting. Does it do a run for every disk?

 

[Davvo]

I feel that what you are experiencing is not standard behaviour.

 

[FlyingPersian]

Code:

root@truenas[~]# zpool status -v
  pool: Data
 state: DEGRADED
status: One or more devices is currently being resilvered.  The pool will
        continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
  scan: resilver in progress since Sun Dec 17 09:54:05 2023
        7.56T scanned at 1017M/s, 5.12T issued at 690M/s, 42.3T total
        890G resilvered, 12.11% done, 15:42:19 to go
config:

        NAME                                              STATE     READ WRITE CKSUM
        Data                                              DEGRADED     0     0     0
          raidz2-0                                        DEGRADED     0     0     0
            replacing-0                                   DEGRADED     0     0     0
              gptid/111dd78e-103b-11e9-b74e-0cc47a406253  OFFLINE      0     0     0
              gptid/f16a1008-9ac4-11ee-91ae-0cc47a406253  ONLINE       0     0     0  (resilvering)
            gptid/f862c9ea-00b4-11ea-9daf-0cc47a406253    ONLINE       0     0     0
            gptid/e79d9e0e-f731-11e9-9ef4-0cc47a406253    ONLINE       0     0     0
            gptid/ed4cf2d0-e4eb-11e8-bded-0cc47a406253    ONLINE       0     0     0
            ada3p2                                        ONLINE       0     0     0
            gptid/b9c40f77-68f3-11e8-a08d-0cc47a406253    ONLINE       0     0     0  (resilvering)

errors: No known data errors

This is what I get now: What does that mean? What are my next steps?