Upgrade (van 9.3 via webgui) naar 9.3 2015.06.04 kan niet meer booten

[ShinobiX9X]

Hallo iedereen,

Ik gebruik freenas nu al enkele jaren (sedert 8.x). Toch ben ik verre van een specialist.
Het is een Dell Poweredge T110
intel xenon 2.4G
4 x 4 G ram
4 x 3 TB hdd (3 WD red en 1 WD green)
1 60 G SSD l2arc
2 4G ssd zil.

Alles werkte perfect tot die laatste update.

ergens in het boot proces stopt die met "KDB enter panic.

Toen heb ik geprobeerd om een nieuwe freenas te installeren op een andere usb stick.
die installeerde correct en werkt, maar zodra ik klik op volume import (of zfs import 'volume') passeert er een razendsnelle tekst and herstart hij. Er werd niets geïmporteerd.

hieronder is wat er staat n dmesg

Code:

      FreeNAS (c) 2009-2015, The FreeNAS Development Team

        All rights reserved.

        FreeNAS is released under the modified BSD license.


        For more information, documentation, help or support, go here:

        http://freenas.org

Welcome to FreeNAS

[root@freenas] ~# dmesg

Copyright (c) 1992-2014 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 9.3-RELEASE-p13 #0 r281084+3bda974: Tue May 12 21:03:11 PDT 2015

    root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENA

amd64 amd64

gcc version 4.2.1 20070831 patched [FreeBSD]

CPU: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz (2394.04-MHz K8-class CPU)

  Origin = "GenuineIntel"  Id = 0x106e5  Family = 0x6  Model = 0x1e  Stepping = 5

  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXS

SSE,SSE2,SS,HTT,TM,PBE>

  Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>

  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>

  AMD Features2=0x1<LAHF>

  TSC: P-state invariant, performance statistics

real memory  = 18253611008 (17408 MB)

avail memory = 16499806208 (15735 MB)

Event timer "LAPIC" quality 400

ACPI APIC Table: <DELL   PE_SC3  >

FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs

FreeBSD/SMP: 1 package(s) x 4 core(s)

cpu0 (BSP): APIC ID:  0

cpu1 (AP): APIC ID:  2

cpu2 (AP): APIC ID:  4

cpu3 (AP): APIC ID:  6

WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.

ioapic0 <Version 2.0> irqs 0-23 on motherboard

ispfw: registered firmware <isp_1040>

ispfw: registered firmware <isp_1040_it>

ispfw: registered firmware <isp_1080>

ispfw: registered firmware <isp_1080_it>

ispfw: registered firmware <isp_12160>

ispfw: registered firmware <isp_12160_it>

ispfw: registered firmware <isp_2100>

ispfw: registered firmware <isp_2200>

ispfw: registered firmware <isp_2300>

ispfw: registered firmware <isp_2322>

ispfw: registered firmware <isp_2400>

ispfw: registered firmware <isp_2400_multi>

ispfw: registered firmware <isp_2500>

ispfw: registered firmware <isp_2500_multi>

kbd1 at kbdmux0

cryptosoft0: <software crypto> on motherboard

aesni0: No AESNI support.

padlock0: No ACE support.

acpi0: <DELL PE_SC3> on motherboard

acpi0: Power Button (fixed)

unknown: I/O range not supported

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

cpu2: <ACPI CPU> on acpi0

cpu3: <ACPI CPU> on acpi0

atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0

Event timer "RTC" frequency 32768 Hz quality 0

attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 550

Event timer "HPET1" frequency 14318180 Hz quality 440

Event timer "HPET2" frequency 14318180 Hz quality 440

Event timer "HPET3" frequency 14318180 Hz quality 440

Event timer "HPET4" frequency 14318180 Hz quality 440

Timecounter "ACPI-safe" frequency 3579545 Hz quality 850

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0

pci1: <ACPI PCI bus> on pcib1

pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0

pci2: <ACPI PCI bus> on pcib2

mvs0: <Adaptec 1430SA SATA controller> port 0xfc00-0xfcff mem 0xdfa00000-0xdfafffff,0xdfb00000-0xdfbfffff irq 16 at de

ce 0.0 on pci2

mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS

mvsch0: <Marvell SATA channel> at channel 0 on mvs0

mvsch1: <Marvell SATA channel> at channel 1 on mvs0

mvsch2: <Marvell SATA channel> at channel 2 on mvs0

mvsch3: <Marvell SATA channel> at channel 3 on mvs0

ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf8fa000-0xdf8fa3ff irq 22 at device 26.0 on pci0

usbus0: EHCI version 1.0

usbus0 on ehci0

pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0

pci3: <ACPI PCI bus> on pcib3

pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0

pci4: <ACPI PCI bus> on pcib4

bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a200> mem 0xdfcf0000-0xdfcfffff irq 16 at device

0 on pci4

bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E

miibus0: <MII bus> on bge0

brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0

brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-ma

er, auto, auto-flow

bge0: Ethernet address: b8:ac:6f:92:94:75

pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0

pci5: <ACPI PCI bus> on pcib5

ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf8fc000-0xdf8fc3ff irq 22 at device 29.0 on pci0

usbus1: EHCI version 1.0

usbus1 on ehci1

pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0

pci6: <ACPI PCI bus> on pcib6

vgapci0: <VGA-compatible display> mem 0xde000000-0xde7fffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 19 at devi

3.0 on pci6

vgapci0: Boot video device

isab0: <PCI-ISA bridge> at device 31.0 on pci0

isa0: <ISA bus> on isab0

ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0xecd0-0xecd7,0xecc8-0xeccb,0xecd8-0xecdf,0xeccc-0xeccf,

ece0-0xecff mem 0xdf8fe000-0xdf8fe7ff irq 20 at device 31.2 on pci0

ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported

ahcich0: <AHCI channel> at channel 0 on ahci0

ahcich1: <AHCI channel> at channel 1 on ahci0

ahcich2: <AHCI channel> at channel 2 on ahci0

ahcich3: <AHCI channel> at channel 3 on ahci0

ahcich4: <AHCI channel> at channel 4 on ahci0

ahcich5: <AHCI channel> at channel 5 on ahci0

uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0

ichwd0 on isa0

orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xd1000-0xd1fff,0xec000-0xeffff on isa0

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

coretemp0: <CPU On-Die Thermal Sensors> on cpu0

est0: <Enhanced SpeedStep Frequency Control> on cpu0

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 12

device_attach: est0 attach returned 6

coretemp1: <CPU On-Die Thermal Sensors> on cpu1

est1: <Enhanced SpeedStep Frequency Control> on cpu1

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 12

device_attach: est1 attach returned 6

coretemp2: <CPU On-Die Thermal Sensors> on cpu2

est2: <Enhanced SpeedStep Frequency Control> on cpu2

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 9

device_attach: est2 attach returned 6

coretemp3: <CPU On-Die Thermal Sensors> on cpu3

est3: <Enhanced SpeedStep Frequency Control> on cpu3

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 9

device_attach: est3 attach returned 6

ZFS filesystem version: 5

ZFS storage pool version: features support (5000)

Timecounters tick every 1.000 msec

ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled

usbus0: 480Mbps High Speed USB v2.0

usbus1: 480Mbps High Speed USB v2.0

ugen0.1: <Intel> at usbus0

uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0

ugen1.1: <Intel> at usbus1

uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1

uhub0: 2 ports with 2 removable, self powered

uhub1: 2 ports with 2 removable, self powered

ugen0.2: <vendor 0x8087> at usbus0

uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0

ugen1.2: <vendor 0x8087> at usbus1

uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1

uhub2: 6 ports with 6 removable, self powered

uhub3: 8 ports with 8 removable, self powered

ugen1.3: <Logitech> at usbus1

ukbd0: <USB Keyboard> on usbus1

kbd0 at ukbd0

uhid0: <USB Keyboard> on usbus1

ugen0.3: <TDK LoR> at usbus0

umass0: <TDK LoR TF10, class 0/0, rev 2.00/1.00, addr 3> on usbus0

umass0:  SCSI over Bulk-Only; quirks = 0xc100

umass0:11:0:-1: Attached to scbus11

ugen0.4: <Kingston> at usbus0

umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0

umass1:  SCSI over Bulk-Only; quirks = 0xc100

umass1:12:1:-1: Attached to scbus12

ada0 at mvsch0 bus 0 scbus0 target 0 lun 0

ada0: <KINGSTON SV300S37A60G 505ABBF0> ATA-8da1 at umass-sim1 bus 1 scbus12 target 0 lun 0

da1: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-4 device

da1: Serial Number 08606E69C773FD41C9652409

da1: 40.000MB/s transfers

da1: 7388MB (15131636 512 byte sectors: 255H 63S/T 941C)

da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>

da0 at umass-sim0 bus 0 scbus11 target 0 lun 0

da0: <TDK LoR TF10 PMAP> Removable Direct Access SCSI-4 device

da0: Serial Number 070737B729442A28

cd0 at ahcich4 bus 0 scbus8 target 0 lun 0

cd0: <HL-DT-ST DVD+-RW GH50N B103> Removable CD-ROM SCSI-0 device

cd0: Serial Number K1FA8IN5736

cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)

cd0: cd present [132424 x 2048 byte records]

da0: 40.000MB/s transfers

da0: 3812MB (7806976 512 byte sectors: 255H 63S/T 485C)

da0: quirks=0x2<NO_6_BYTE>

SATA 3.x device

ada0: Serial Number 50026B733400DC7D

ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada0: Command Queueing enabled

ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)

ada0: Previously was known as ad4

ada1 at mvsch2 bus 0 scbus2 target 0 lun 0

ada1: <SMART Lite SATA Drive FER1.196> ATA-7 SATA 2.x device

ada1: Serial Number 20090811044F439A439A

ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)

ada1: 3920MB (8028160 512 byte sectors: 16H 63S/T 7964C)

ada1: Previously was known as ad8

ada2 at mvsch3 bus 0 scbus3 target 0 lun 0

ada2: <SMART Lite SATA Drive FER1.196> ATA-7 SATA 2.x device

ada2: Serial Number 2010030300324B8C4B8C

ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)

ada2: 3920MB (8028160 512 byte sectors: 16H 63S/T 7964C)

ada2: Previously was known as ad10

ada3 at ahcich0 bus 0 scbus4 target 0 lun 0

ada3: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device

ada3: Serial Number WD-WCC4N1087703

ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada3: Command Queueing enabled

ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)

ada3: quirks=0x1<4K>

ada3: Previously was known as ad12

ada4 at ahcich1 bus 0 scbus5 target 0 lun 0

ada4: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device

ada4: Serial Number WD-WCAWZ1235259

ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada4: Command Queueing enabled

ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)

ada4: quirks=0x1<4K>

ada4: Previously was known as ad14

ada5 at ahcich2 bus 0 scbus6 target 0 lun 0

ada5: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device

ada5: Serial Number WD-WCC4N1101140

ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada5: Command Queueing enabled

ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)

ada5: quirks=0x1<4K>

ada5: Previously was known as ad16

ada6 at ahcich3 bus 0 scbus7 target 0 lun 0

ada6: <WDC WD30EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device

ada6: Serial Number WD-WCC4N1NA9S2V

ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada6: Command Queueing enabled

ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)

ada6: quirks=0x1<4K>

ada6: Previously was known as ad18

SMP: AP CPU #1 Launched!

SMP: AP CPU #2 Launched!

SMP: AP CPU #3 Launched!

Timecounter "TSC-low" frequency 1197019030 Hz quality 1000

Trying to mount root from zfs:freenas-boot/ROOT/default []...

GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)

ipmi0: <IPMI System Interface> on isa0

ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa

ipmi0: IPMI device rev. 0, firmware rev. 1.92, version 2.0

ipmi0: Number of channels 5

ipmi0: Attached watchdog

vboxdrv: fAsync=0 offMin=0x564 offMax=0x1932

[root@freenas] ~#

Enig idee wat te doen? Dank je :)

 

[Noctris]

Heb je een backup van de config? Anders zou ik eens een clean install doen oo een andere usb en die importeren om te zien wat dat geeft.

 

[ShinobiX9X]

Hoi, bedankt,

maar nee, niets te zien. Heb de laatste FreeBSD geprobeert, en dit toonde aan
dat m'n pool verloren is. Gelukkige had ik een kopie van de belangerijkste dingen.
Ben herbegonnen, is weer een beetje zoeken voor de juiste instellingen en rechten, maar het gaat goed.

 

[Rilo Ravestein]

Er zijn in het engelstalig forum een aantal posts die vertellen hoe te upgraden van 8.x naar 9.3.
https://forums.freenas.org/index.php?threads/upgrading-from-8-0-to-9-3.30342/#post-195493
waarin verwezen wordt naar:
https://forums.freenas.org/index.ph...over-afp-in-yosemite-10-10.25619/#post-161331

Verder is dit echt totaal overbodig voor jouw systeem:

1 60 G SSD l2arc
2 4G ssd zil.

Het voegt niets toe, behalve meer faalkans en meer energieverbruik. Check dit eens:
https://forums.freenas.org/index.ph...ning-vdev-zpool-zil-and-l2arc-for-noobs.7775/