ShinobiX9X
Contributor
- Joined
- Mar 6, 2013
- Messages
- 141
Hallo iedereen,
Ik gebruik freenas nu al enkele jaren (sedert 8.x). Toch ben ik verre van een specialist.
Het is een Dell Poweredge T110
intel xenon 2.4G
4 x 4 G ram
4 x 3 TB hdd (3 WD red en 1 WD green)
1 60 G SSD l2arc
2 4G ssd zil.
Alles werkte perfect tot die laatste update.
ergens in het boot proces stopt die met "KDB enter panic.
Toen heb ik geprobeerd om een nieuwe freenas te installeren op een andere usb stick.
die installeerde correct en werkt, maar zodra ik klik op volume import (of zfs import 'volume') passeert er een razendsnelle tekst and herstart hij. Er werd niets geïmporteerd.
hieronder is wat er staat n dmesg
Enig idee wat te doen? Dank je :)
Ik gebruik freenas nu al enkele jaren (sedert 8.x). Toch ben ik verre van een specialist.
Het is een Dell Poweredge T110
intel xenon 2.4G
4 x 4 G ram
4 x 3 TB hdd (3 WD red en 1 WD green)
1 60 G SSD l2arc
2 4G ssd zil.
Alles werkte perfect tot die laatste update.
ergens in het boot proces stopt die met "KDB enter panic.
Toen heb ik geprobeerd om een nieuwe freenas te installeren op een andere usb stick.
die installeerde correct en werkt, maar zodra ik klik op volume import (of zfs import 'volume') passeert er een razendsnelle tekst and herstart hij. Er werd niets geïmporteerd.
hieronder is wat er staat n dmesg
Code:
FreeNAS (c) 2009-2015, The FreeNAS Development Team
All rights reserved.
FreeNAS is released under the modified BSD license.
For more information, documentation, help or support, go here:
http://freenas.org
Welcome to FreeNAS
[root@freenas] ~# dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p13 #0 r281084+3bda974: Tue May 12 21:03:11 PDT 2015
root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENA
amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106e5 Family = 0x6 Model = 0x1e Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXS
SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 18253611008 (17408 MB)
avail memory = 16499806208 (15735 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mvs0: <Adaptec 1430SA SATA controller> port 0xfc00-0xfcff mem 0xdfa00000-0xdfafffff,0xdfb00000-0xdfbfffff irq 16 at de
ce 0.0 on pci2
mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS
mvsch0: <Marvell SATA channel> at channel 0 on mvs0
mvsch1: <Marvell SATA channel> at channel 1 on mvs0
mvsch2: <Marvell SATA channel> at channel 2 on mvs0
mvsch3: <Marvell SATA channel> at channel 3 on mvs0
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf8fa000-0xdf8fa3ff irq 22 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a200> mem 0xdfcf0000-0xdfcfffff irq 16 at device
0 on pci4
bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-ma
er, auto, auto-flow
bge0: Ethernet address: b8:ac:6f:92:94:75
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf8fc000-0xdf8fc3ff irq 22 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xde000000-0xde7fffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 19 at devi
3.0 on pci6
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0xecd0-0xecd7,0xecc8-0xeccb,0xecd8-0xecdf,0xeccc-0xeccf,
ece0-0xecff mem 0xdf8fe000-0xdf8fe7ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ichwd0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xd1000-0xd1fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est0 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est1 attach returned 6
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9
device_attach: est2 attach returned 6
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Logitech> at usbus1
ukbd0: <USB Keyboard> on usbus1
kbd0 at ukbd0
uhid0: <USB Keyboard> on usbus1
ugen0.3: <TDK LoR> at usbus0
umass0: <TDK LoR TF10, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:11:0:-1: Attached to scbus11
ugen0.4: <Kingston> at usbus0
umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:12:1:-1: Attached to scbus12
ada0 at mvsch0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A60G 505ABBF0> ATA-8da1 at umass-sim1 bus 1 scbus12 target 0 lun 0
da1: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-4 device
da1: Serial Number 08606E69C773FD41C9652409
da1: 40.000MB/s transfers
da1: 7388MB (15131636 512 byte sectors: 255H 63S/T 941C)
da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
da0 at umass-sim0 bus 0 scbus11 target 0 lun 0
da0: <TDK LoR TF10 PMAP> Removable Direct Access SCSI-4 device
da0: Serial Number 070737B729442A28
cd0 at ahcich4 bus 0 scbus8 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GH50N B103> Removable CD-ROM SCSI-0 device
cd0: Serial Number K1FA8IN5736
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [132424 x 2048 byte records]
da0: 40.000MB/s transfers
da0: 3812MB (7806976 512 byte sectors: 255H 63S/T 485C)
da0: quirks=0x2<NO_6_BYTE>
SATA 3.x device
ada0: Serial Number 50026B733400DC7D
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at mvsch2 bus 0 scbus2 target 0 lun 0
ada1: <SMART Lite SATA Drive FER1.196> ATA-7 SATA 2.x device
ada1: Serial Number 20090811044F439A439A
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada1: 3920MB (8028160 512 byte sectors: 16H 63S/T 7964C)
ada1: Previously was known as ad8
ada2 at mvsch3 bus 0 scbus3 target 0 lun 0
ada2: <SMART Lite SATA Drive FER1.196> ATA-7 SATA 2.x device
ada2: Serial Number 2010030300324B8C4B8C
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada2: 3920MB (8028160 512 byte sectors: 16H 63S/T 7964C)
ada2: Previously was known as ad10
ada3 at ahcich0 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
ada3: Serial Number WD-WCC4N1087703
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad12
ada4 at ahcich1 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device
ada4: Serial Number WD-WCAWZ1235259
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada4: quirks=0x1<4K>
ada4: Previously was known as ad14
ada5 at ahcich2 bus 0 scbus6 target 0 lun 0
ada5: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
ada5: Serial Number WD-WCC4N1101140
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada5: quirks=0x1<4K>
ada5: Previously was known as ad16
ada6 at ahcich3 bus 0 scbus7 target 0 lun 0
ada6: <WDC WD30EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device
ada6: Serial Number WD-WCC4N1NA9S2V
ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada6: quirks=0x1<4K>
ada6: Previously was known as ad18
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1197019030 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/default []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
ipmi0: IPMI device rev. 0, firmware rev. 1.92, version 2.0
ipmi0: Number of channels 5
ipmi0: Attached watchdog
vboxdrv: fAsync=0 offMin=0x564 offMax=0x1932
[root@freenas] ~#Enig idee wat te doen? Dank je :)
