TerranPhil
Dabbler
- Joined
- Jan 17, 2015
- Messages
- 19
Hello,
Updating to anything past FreeNAS-9.3-STABLE-201512121950 results in mountroot prompt. I've tried a number of suggestions in the pinned thread "Workaround/Semi-Fix for Mountroot Issues with 9.3!" without success. I've added the boot delay with a value of "50000" to Tunables and trying different USB ports including 2.0 ports to name a couple to no avail.
I am able to boot fine to FreeNAS-9.3-STABLE-201512121950 and earlier versions however I have been unable to update to anything beyond that. I've tried to update on a couple different occasions over the past couple of months most recently today with version FreeNAS-9.3-STABLE-201604150515 with the same mountroot result.
Today I updated the TS140's BIOS thinking the following updates might remedy the situation. They did not.
I'm at a loss at this point. If anyone has some additional suggestions that I might try to remedy the situation it would be greatly appreciated. Thank you for your time!
My hardware:
Phil
Updating to anything past FreeNAS-9.3-STABLE-201512121950 results in mountroot prompt. I've tried a number of suggestions in the pinned thread "Workaround/Semi-Fix for Mountroot Issues with 9.3!" without success. I've added the boot delay with a value of "50000" to Tunables and trying different USB ports including 2.0 ports to name a couple to no avail.
I am able to boot fine to FreeNAS-9.3-STABLE-201512121950 and earlier versions however I have been unable to update to anything beyond that. I've tried to update on a couple different occasions over the past couple of months most recently today with version FreeNAS-9.3-STABLE-201604150515 with the same mountroot result.
Today I updated the TS140's BIOS thinking the following updates might remedy the situation. They did not.
Code:
<81A> -Fix the issue that some USB devices may not be recognized correctly during boot. -Fix the issue that system may hang while trying to boot from some models of USB storages formatted as NTFS.
I'm at a loss at this point. If anyone has some additional suggestions that I might try to remedy the situation it would be greatly appreciated. Thank you for your time!
My hardware:
- ThinkServer TS140 Tower Server
- Crucial 16GB Kit (8GBx2) DDR3L 1600MT/s (PC3-12800) DR x8 ECC UDIMM 240-Pin Server Memory CT2KIT102472BD160B
- 3 of SanDisk Ultra Fit™ CZ43 16GB USB 3.0 Low-Profile Flash Drive Up To 130MB/s Read- SDCZ43-016G-G46
Phil