I built this FreeNAS box a month or two ago as a 9.3 box, and noticed it would get unresponsive in the web UI, so I upgraded to 11.3 (I think U3, but no way to tell now that I know of) in hopes that it was a resolved issue. Seemed to be for a few weeks, then I get to this.
I can't ever get to the log in prompt. Console seems responsive (but I don't really know what I'm doing there). Refreshing the page takes forever, but I never get the login screen, just the shark logo and nothing.
It's a dual proc socket SuperMicro 1156 board (don't remember the CPUs specifically) with 32gb of ECC RAM, using an Intel 10gbe NIC to connect to my network. I did at one point set the MTU to 9000 (which works with my VMware hosts just fine). I've tried on multiple machines with multiple browsers, including Win7 and Win10, Chrome, MSIE, and even Edge.
The funny thing is that the volumes set up (6x8TB in RAIDZ2 hanging off an LSI HBA) share out just fine via SMB until you start trying to browse them, then they timeout. I just added a PERC H310 flashed to IT mode and connected to 4x1TB SSDs that I need to set up in iSCSI and share out to vSphere so I can host VMs off it, but I can't do anything since I can't log into the web GUI.
EDIT: top shows no more than 3-5% CPU usage and 27G of memory free. Mostly collectd and python3.7 using the proc. Obviously, console and shell are responsive.
EDIT2: There are no VMs, and the RAIDZ2 array is configured for either SMB sharing only. Nothing should be taxing memory or proc usage.
Really hoping for some strong troubleshooting tips or links - I'm passable with Debian but I don't know BSD at all. Help?
I can't ever get to the log in prompt. Console seems responsive (but I don't really know what I'm doing there). Refreshing the page takes forever, but I never get the login screen, just the shark logo and nothing.
It's a dual proc socket SuperMicro 1156 board (don't remember the CPUs specifically) with 32gb of ECC RAM, using an Intel 10gbe NIC to connect to my network. I did at one point set the MTU to 9000 (which works with my VMware hosts just fine). I've tried on multiple machines with multiple browsers, including Win7 and Win10, Chrome, MSIE, and even Edge.
The funny thing is that the volumes set up (6x8TB in RAIDZ2 hanging off an LSI HBA) share out just fine via SMB until you start trying to browse them, then they timeout. I just added a PERC H310 flashed to IT mode and connected to 4x1TB SSDs that I need to set up in iSCSI and share out to vSphere so I can host VMs off it, but I can't do anything since I can't log into the web GUI.
EDIT: top shows no more than 3-5% CPU usage and 27G of memory free. Mostly collectd and python3.7 using the proc. Obviously, console and shell are responsive.
EDIT2: There are no VMs, and the RAIDZ2 array is configured for either SMB sharing only. Nothing should be taxing memory or proc usage.
Really hoping for some strong troubleshooting tips or links - I'm passable with Debian but I don't know BSD at all. Help?