"Truenas scale" "amd phenom II x4 955" temperatura y drivers

[erielrojo]

Buenas a todos, acabo de instalar truenas scale 22.02.3, el dashboard no muestra la temperatura de la cpu, sin embargo ejecutando sensors si la obtengo

sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0°C (high = +70.0°C)
(crit = +90.0°C, hyst = +88.0°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +46.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: 1.02 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: 3.31 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: 5.00 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: 12.07 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 1748 RPM (min = 600 RPM, max = 7200 RPM)
Chassis Fan Speed: 3479 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 681 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +37.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +39.0°C (high = +45.0°C, crit = +75.0°C)

¿alguien sabe como solventarlo?

lo otro tengo una tarjeta de red asus pce-c2500, que me la detecta con el driver r8169, cuando el correcto deberia ser el r8125

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 01)
Subsystem: Device 0b05:18d2
Flags: bus master, fast devsel, latency 0, IRQ 17, NUMA node 0
I/O ports at e800
Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Memory at fe9ec000 (64-bit, non-prefetchable) [size=16K]
Expansion ROM at fe9d0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Virtual Channel
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Alternative Routing-ID Interpretation (ARI)
Capabilities: [188] Single Root I/O Virtualization (SR-IOV)
Capabilities: [1c8] Transaction Processing Hints
Capabilities: [254] Latency Tolerance Reporting
Capabilities: [25c] L1 PM Substates
Capabilities: [26c] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?>
Kernel driver in use: r8169
Kernel modules: r8169

He intentado cargar el driver correcto pero tampoco me deja

solo veo estos repos:

cat /etc/apt/sources.list
# Default APT sources.list for TrueNAS SCALE
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/gluster/ bullseye main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/docker/ buster stable
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/libnvidia/ bullseye main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/nvidia-container/ bullseye main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/nvidia-docker/ bullseye main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/debian/ bullseye main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/debian-debug/ bullseye-debug main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/debian-security/ bullseye-security main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/debian-security-22.02.3/ bullseye-security main
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/debian-backports/ bullseye-backports main contrib non-free
deb http://apt.tn.ixsystems.com/apt-direct/angelfish/22.02.3/helm/ all main

y cualquier intento de añadir un repo o intentar instalar algo me da un

zsh: permission denied: apt-cache

Algo que encuentro lógico, pero debe de haber alguna alternativa (bajo tu propio riesgo) "me imagino"

¿alguien me indica cómo o sabe como hacerlo?

​

​