I'm using an APC BE750G and I wanted to see what my systems power consumption is under various loads. I ran upsc ups@localhost and here is the output:
Is the current power consumption the ups.load (7%)? If so, is that 7% of 450w -- so 32w? That seems on the low side.
Is the current power consumption the ups.load (7%)? If so, is that 7% of 450w -- so 32w? That seems on the low side.
Code:
[root@freenas ~]# upsc ups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2015/08/04 battery.runtime: 4329 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 13.8 battery.voltage.nominal: 12.0 device.mfr: American Power Conversion device.model: Back-UPS ES 750G device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: driver.parameter.synchronous: no driver.version: 2.7.3 driver.version.data: APC HID 0.95 driver.version.internal: 0.39 input.sensitivity: medium input.transfer.high: 139 input.transfer.low: 92 input.transfer.reason: input voltage out of range input.voltage: 121.0 input.voltage.nominal: 120 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.firmware: 908.W4 .D ups.firmware.aux: W4 ups.load: 7 ups.mfr: American Power Conversion ups.mfr.date: 2015/08/04 ups.model: Back-UPS ES 750G ups.productid: 0002 ups.realpower.nominal: 450 ups.serial: 4B1532P01778 ups.status: OL ups.test.result: No test initiated ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.vendorid: 051d [root@freenas ~]#
Last edited:
