dairyengguy
Dabbler
- Joined
- Jul 17, 2015
- Messages
- 28
Hi all, it's been a while since I posted here. I have read so many threads about this error that they are starting to blend together.
I have this error in the gui and my email:
I immediately ran a scrub which completed without error.
I then ran a long smart test on the drive, which completed successfully.
Now, I am fairly certain that this drive is fine. Just in case, I have a couple backups on hand, but if I don't have to use them, then great.
My question is, how do I clear this error? It's starting to annoy me sitting there in Nagios. I tried zpool clear, but that did nothing.
Thanks for any help!
I have this error in the gui and my email:
Code:
Device: /dev/da5 [SAT], 1 Currently unreadable (pending) sectors
I immediately ran a scrub which completed without error.
Code:
pool: DEC01 state: ONLINE scan: scrub repaired 0 in 5h32m with 0 errors on Mon Apr 25 15:48:18 2016 config: NAME STATE READ WRITE CKSUM DEC01 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/e9a9e25a-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/ea394851-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/eae2ef4e-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/eb7c10f4-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/ec0c485e-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/ed0617ad-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/edb042ee-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/ee30da6c-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/eebdef90-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 gptid/ef453631-3566-11e5-8db4-00269e3c7a1b ONLINE 0 0 0 logs gptid/1db68372-3d2a-11e5-a644-00269e3c7a1b ONLINE 0 0 0 errors: No known data errors
I then ran a long smart test on the drive, which completed successfully.
Code:
smartctl -q noserial -a /dev/da5 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD10EARS-00Y5B1 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 28 10:08:09 2016 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 240) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 134 131 021 Pre-fail Always - 6266 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 684 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22013 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 82 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 430 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1296346 194 Temperature_Celsius 0x0022 119 095 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 21947 - # 2 Extended offline Completed without error 00% 21909 - # 3 Short offline Completed without error 00% 21881 - # 4 Short offline Completed without error 00% 21714 - # 5 Extended offline Completed without error 00% 21667 - # 6 Short offline Completed without error 00% 21546 - # 7 Extended offline Completed without error 00% 21428 - # 8 Short offline Completed without error 00% 21378 - # 9 Short offline Completed without error 00% 21161 - #10 Short offline Completed without error 00% 20996 - #11 Extended offline Completed without error 00% 20950 - #12 Short offline Completed without error 00% 20830 - #13 Extended offline Completed without error 00% 20712 - #14 Short offline Completed without error 00% 20662 - #15 Extended offline Completed without error 00% 20497 - #16 Short offline Completed without error 00% 20471 - #17 Short offline Completed without error 00% 20304 - #18 Extended offline Completed without error 00% 20258 - #19 Short offline Completed without error 00% 20136 - #20 Extended offline Interrupted (host reset) 30% 20017 - #21 Short offline Completed without error 00% 19968 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Now, I am fairly certain that this drive is fine. Just in case, I have a couple backups on hand, but if I don't have to use them, then great.
My question is, how do I clear this error? It's starting to annoy me sitting there in Nagios. I tried zpool clear, but that did nothing.
Thanks for any help!