Lo primero hola a todos, resulta que hay un foro en español y yo preguntando con mi "inglés" en el otro.....
En el foro general (inglés), hice una consulta por que no era capaz de instalar la red y di los datos de mi equipo. Y me comentaron algo sobre los discos duros WD Red (que yo les describí) hago primero un comentario y pongo lo que me respondieron.
Antes decir que quiero hacer Raid1 o Raid5 (aun me lo estoy pensando)
Yo siempre me gusto más seagate y iba comprar unos wolft, pero por más que leía la gente aconsejaba los WD RED...
Bueno, me respondieron esto en el post, a ver si alguien me saca de dudas o más bien me aconseja.
El que quiera ver el post original...
www.ixsystems.com
A ver si ya resuelvo mis dudas he invierto en discos.
MI EQUIPO
HP Proliant ML110 G6
Intel® Xeon® X3430 2,40 GHz
Intel® Smart 8MB de caché
DDR3 PC3-10600E 8Gb
3x SATA WD RED for Raid 5
Internal Usb with MicroSD 32 Gb for de OS
Red
- Port 1, 1 GbE NC107i
- Adaptataor NC107i PCI-Express Gigabit Ethernet
En el foro general (inglés), hice una consulta por que no era capaz de instalar la red y di los datos de mi equipo. Y me comentaron algo sobre los discos duros WD Red (que yo les describí) hago primero un comentario y pongo lo que me respondieron.
Antes decir que quiero hacer Raid1 o Raid5 (aun me lo estoy pensando)
Yo siempre me gusto más seagate y iba comprar unos wolft, pero por más que leía la gente aconsejaba los WD RED...
Bueno, me respondieron esto en el post, a ver si alguien me saca de dudas o más bien me aconseja.
Careful - some models of newer WD RED drives use Shingled Magnetic Recording (SMR) and are highly unsuitable for use with ZFS. Can you post the model number you have bought/intend to buy? "Shucked" external drives in the 8/10/12TB are very popular.
See the WD list of SKUs using SMR. https://blog.westerndigital.com/wp-content/uploads/2020/04/2020_04_22_WD_SMR_SKUs_1Slide.pdf
Any other model of Reds will work. In particular, the EFRXs are CMR and are selling out fast.
El que quiera ver el post original...
Freenas on HP Proliant ML110 G6 - Driver problem at first start
Hello everyone I have an "HP Proliant ML110 G6" (I know it's something old), but I want to take advantage of it for my own "NAS" (I think it's not a bad option). But I have a problem ... I install Freenas perfectly without problems, but when I do the "first boot" it doesn't detect any of the two...

A ver si ya resuelvo mis dudas he invierto en discos.
MI EQUIPO
HP Proliant ML110 G6
Intel® Xeon® X3430 2,40 GHz
Intel® Smart 8MB de caché
DDR3 PC3-10600E 8Gb
3x SATA WD RED for Raid 5
Internal Usb with MicroSD 32 Gb for de OS
Red
- Port 1, 1 GbE NC107i
- Adaptataor NC107i PCI-Express Gigabit Ethernet
Last edited: