Hallo together,
i have an issue with smb Multichannel.
My Config is Freenas 11.2 U5 on a xeon 1246v3 with 32gb ram and 2 Intel 210 NIC.
Everything is working fine I have no Speed Problems or else.
Only when I sharing over SMB to a Windows 10 Machine
The problem I can sent from a Windows 10 Machine to the FreeNAS Server with full Speed 226mb/s alll the way.
Backward when i pull from the Freenas Server to the same Windows Machine i get only 113mb/s so the second channel is not in use.
When I copy between 2 Windows 10 Machines i have also the full speed 226mb/s in both ways.
Only when windows is Pulling from Freenas then I get only one channel.
When sending from Windows to FreeNAS then I have both Channels.
Did anybody have the same issue and how i can resolve this Problem.
I activated on Freenas Multichannel for SMB =yes in the Config for Samba.
i have an issue with smb Multichannel.
My Config is Freenas 11.2 U5 on a xeon 1246v3 with 32gb ram and 2 Intel 210 NIC.
Everything is working fine I have no Speed Problems or else.
Only when I sharing over SMB to a Windows 10 Machine
The problem I can sent from a Windows 10 Machine to the FreeNAS Server with full Speed 226mb/s alll the way.
Backward when i pull from the Freenas Server to the same Windows Machine i get only 113mb/s so the second channel is not in use.
When I copy between 2 Windows 10 Machines i have also the full speed 226mb/s in both ways.
Only when windows is Pulling from Freenas then I get only one channel.
When sending from Windows to FreeNAS then I have both Channels.
Did anybody have the same issue and how i can resolve this Problem.
I activated on Freenas Multichannel for SMB =yes in the Config for Samba.