Good Evening freenas forum
Before anyone flames me for not reading the FAQ's and countless other posts regarding this issue, I've read them and need help beyond what google can tell me.
Now I'm running a gigabit router, All cat 6 cables. I'm running a freenas 8.3 (latest stable version) on an AMD A4-5300 Chip on a MSI FM2-A85XA-G65 with 2xSeagate 3TB and 3xHitachi 3TB drives in a ZFS RaidZ pool. All drives on SATA 6gbps cables/ports with 16GB of 1600mhz ddr3. My data is currently on a DLink DNS-323 running Raid-0 2x 1.5WD black setup. I'm attempting to transfer files from the Dlink to the Freenas box over CIFS/Samba Shares on via My Win7 Machine. I had the Freenas server relegated to a 100BaseT and moved it to gigabit (I've checked the root console with ifconfig to have it at 1000BaseT w/ full duplex now) I was getting 9.7-10 MB/s previously now that its on gigabit I'm seeing 14 MB/s when i should realistically see 60-80-100MB/s I've been over all the CIFS settings designed to increase network/filetransfer speeds recomended in previous posts without positive results. I'm not a freebsd guru, so I haven't started really really digging into the core the OS. I ran a JPerf on TCP and UDP and seeing 500-600 Mbits/sec and 70 MB/s (tcp/udp) I've tried fooling with Jumbo frames/High MTU on client, NAS, and Freenas with no positive results either.
I'm contemplating on getting another set of 16 gigs of ram and seeing if that helps, but I'm looking for the free fix before I shell out more money for ram.
I'm really not sure what to do at this point, so any suggestions would be happily welcome.
I can provide logs, info, or anything else that may help evaluate the problem I'm happing
Thanks
-Andrew
Before anyone flames me for not reading the FAQ's and countless other posts regarding this issue, I've read them and need help beyond what google can tell me.
Now I'm running a gigabit router, All cat 6 cables. I'm running a freenas 8.3 (latest stable version) on an AMD A4-5300 Chip on a MSI FM2-A85XA-G65 with 2xSeagate 3TB and 3xHitachi 3TB drives in a ZFS RaidZ pool. All drives on SATA 6gbps cables/ports with 16GB of 1600mhz ddr3. My data is currently on a DLink DNS-323 running Raid-0 2x 1.5WD black setup. I'm attempting to transfer files from the Dlink to the Freenas box over CIFS/Samba Shares on via My Win7 Machine. I had the Freenas server relegated to a 100BaseT and moved it to gigabit (I've checked the root console with ifconfig to have it at 1000BaseT w/ full duplex now) I was getting 9.7-10 MB/s previously now that its on gigabit I'm seeing 14 MB/s when i should realistically see 60-80-100MB/s I've been over all the CIFS settings designed to increase network/filetransfer speeds recomended in previous posts without positive results. I'm not a freebsd guru, so I haven't started really really digging into the core the OS. I ran a JPerf on TCP and UDP and seeing 500-600 Mbits/sec and 70 MB/s (tcp/udp) I've tried fooling with Jumbo frames/High MTU on client, NAS, and Freenas with no positive results either.
I'm contemplating on getting another set of 16 gigs of ram and seeing if that helps, but I'm looking for the free fix before I shell out more money for ram.
I'm really not sure what to do at this point, so any suggestions would be happily welcome.
I can provide logs, info, or anything else that may help evaluate the problem I'm happing
Thanks
-Andrew